Models > 3ET16NKXDN00

3ET16NKXDN00 Whirlpool Refrigerator - Overview

Get Parts and Repair Help for 3ET16NKXDN00

If you know the refrigerator repair part you need, you can browse the list of all parts on the 3ET16NKXDN00, or you can search by name or part description. You can also find your part by where it is located on the 3ET16NKXDN00 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for 3ET16NKXDN00 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the 3ET16NKXDN00 [Viewing 5 of 5]

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$53.82

Crisper Pan

$7.28

Light Rocker Switch

$3.96

Door Shelf Retainer Bar End Cap

$3.96

End Cap Trim Piece

$16.04

Crisper Drawer Rail

$2.03

Screw with Washer

This metallic screw is less than an inch long and comes with a plastic washer.

$3.86

Touch-Up Paint - White

$28.51

Light Socket Kit

The bulb is sold separately.

$4.06

End Cap Trim - White

$22.43

Door Shelf Trim

Also known as door retainer bar. End caps are not included. White in color.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Lights inside refrigerator not working

  • Customer: Clint from Rayville MO
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 31 of 38 people found this instruction helpful
I used a flat-head screwdriver to pop out the old light rocker switch. Then, I unplugged the wires, plugged them into the new light rocker switch, and then popped the new switch into the hole. That's it! Lights began working again. read more

Missing center track for crisper drawers

  • Customer: JR from Portland OR
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 16 of 17 people found this instruction helpful
Remove the glass shelf and the support frame. Bend the front clip on the track back far enough to fit into slot on frame. Insert the back end of the track into the opening at the back of the frame. Press the front end of the track into the retainer slot in the frame. Reinstall the frame and glass shelf. Done. read more

The rubber piece around it was worn out

  • Customer: Carmen from Albany NY
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required:
  • 15 of 19 people found this instruction helpful
We just had to find the trick to put it in where it would catch on and the rest was a piece a cake.

You had to put it in the groove where it would catch and snap it in place and the rest went in
pretty easy. read more