38586 Toro Snow Blower - Overview

Manual

*NLA*VOLT SWITCH

Nut-Lock, Ni This Ni Nut-Lock, or Nylock Nut, is a Silver 1/4 x 20 metal nut. Sold individually, it can be adjusted using a wrench or socket and torque wrench to the manufacturer specfications, and is used to secu... Add to cart

Bulb-Primer

★★★★★

★★★★★

(1)

This manufacturer-certified Primer Bulb is a black rubber part which comes individually sold. It is used to pump fuel from the fuel tank to the carburetor to start the engine. Installation is rated as... Add to cart

Screw Add to cart

Washer-Curved A washer is used for things such as load distribution, stability, alignment and protection for whatever equipment it is fastened between. This curved washer, also known as a wave washer or spring wash... Add to cart

Bowl Gasket Tecumseh This OEM Carburetor Bowl Gasket attaches between the carburetor bowl and carburetor in order to seal the parts together. This model is rubber, black, and comes individually sold. Installation is rated...

Screw-Hwh Add to cart

Nut-Lock, Ni The Ni Lock Nut (Nylock Nut) is a Silver, 5/16x18, individually sold metal nut. It can be adjusted and replaced using a wrench or socket and torque wrench to the manufacturer specfications, and is use... Add to cart

Key-Ignition This ignition key is used in lawn equipment to start and stop its engine. Inserting the key into the ignition switch activates the starter motor. Thus, it is a safety device which prevents accidental ... Add to cart

Nut-Lock, Ni Add to cart

Fuel Line Clamp The Fuel Line Clamp is a metal, individually sold part which clamps onto the fuel line, securing it to a port and preventing leaks. Installation is rated as "Easy" by customers and will require pliers... Add to cart

Blade-Rotor This rotor blade, also known as an auger or a paddle, is a rotating component located in the rotor assembly of your snowblower. It drags snow along the ground and pushes it through the chute for disch... Add to cart

Brush Card Assembly Add to cart