Models > 38056

38056 Toro Snow Blower - Overview

Models starting with 38056

Exact Part matches for your search term

[Viewing 4 of 4]
VENT CAP,TOP – Part Number: 38056
VENT CAP,TOP
This part number matches the current model number 38056
PartSelect #: PS4263491
Manufacturer #: 38056
  No Longer Available
Screw – Part Number: 38056
Screw
This part number matches the current model number 38056
PartSelect #: PS12277524
Manufacturer #: 38056
  No Longer Available
***assy,motor,cap,100 – Part Number: 38056
***assy,motor,cap,100
This part number matches the current model number 38056
PartSelect #: PS12629262
Manufacturer #: 38056
  No Longer Available
Literature Kit For 4 Burner Summit Lp, Usa – Part Number: 38056
Literature Kit For 4 Burner Summit Lp, Usa
This part number matches the current model number 38056
PartSelect #: PS16601827
Manufacturer #: 38056
  No Longer Available
Keep searches simple, eg. "belt" or "pump".
Screw – Part Number: 321-10
Screw
PartSelect #: PS9942372
Manufacturer #: 321-10
This is a replacement screw, also known as a shear pin that is used in several pieces of outdoor power equipment. It is made of metal and is approximately 2 inches in length. It is a hex head screw an...
$3.99
  In Stock
Nut-Lock, Ni – Part Number: 3296-42
Nut-Lock, Ni
PartSelect #: PS8953555
Manufacturer #: 3296-42
This Ni Nut-Lock, or Nylock Nut, is a Silver 1/4 x 20 metal nut. Sold individually, it can be adjusted using a wrench or socket and torque wrench to the manufacturer specfications, and is used to secu...
$3.99
  In Stock
Fuel Tank – Part Number: 35584
Fuel Tank
PartSelect #: PS9277140
Manufacturer #: 35584
$40.57
  In Stock
Screw – Part Number: 650926
Screw
PartSelect #: PS9293090
Manufacturer #: 650926
$4.99
  In Stock
Screw-Taptite – Part Number: 32144-41
Screw-Taptite
PartSelect #: PS8950288
Manufacturer #: 32144-41
$5.60
  In Stock
Bowl Gasket Tecumseh – Part Number: 49-841
Bowl Gasket Tecumseh
PartSelect #: PS9958948
Manufacturer #: 49-841
This OEM Carburetor Bowl Gasket attaches between the carburetor bowl and carburetor in order to seal the parts together. This model is rubber, black, and comes individually sold. Installation is rated...
  No Longer Available
Nut-Lock, Ni – Part Number: 3296-29
Nut-Lock, Ni
PartSelect #: PS9276436
Manufacturer #: 3296-29
The Ni Lock Nut (Nylock Nut) is a Silver, 5/16x18, individually sold metal nut. It can be adjusted and replaced using a wrench or socket and torque wrench to the manufacturer specfications, and is use...
$3.99
  In Stock
Ring-Retaining – Part Number: 32151-61
Ring-Retaining
PartSelect #: PS8950132
Manufacturer #: 32151-61
This metal retaining ring, otherwise known as a snap ring, holds parts in place in your lawn equipment, such as blades, shafts, pulleys, or other rotating components, to prevent them from sliding off ...
$3.99
  In Stock
Key-Ignition – Part Number: 63-8360
Key-Ignition
PartSelect #: PS9051002
Manufacturer #: 63-8360
This ignition key is used in lawn equipment to start and stop its engine. Inserting the key into the ignition switch activates the starter motor. Thus, it is a safety device which prevents accidental ...
$5.96
  In Stock
Nut-Lock, Ni – Part Number: 3296-56
Nut-Lock, Ni
PartSelect #: PS8953375
Manufacturer #: 3296-56
$3.99
  In Stock
Fuel Line Clamp – Part Number: 26460
Fuel Line Clamp
PartSelect #: PS8938782
Manufacturer #: 26460
The Fuel Line Clamp is a metal, individually sold part which clamps onto the fuel line, securing it to a port and preventing leaks. Installation is rated as "Easy" by customers and will require pliers...
$4.99
  In Stock
Brush Card Assembly – Part Number: 35452A
Brush Card Assembly
PartSelect #: PS8957218
Manufacturer #: 35452A
$51.69
  Special Order
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Bad Camshaft made of plastic
Ordered a replacement camshaft and had a terrible result. Supposed to be in stock but wasn't. NO update on when the part would arrive. NO contact unless I initiated it. Only email I received stated NO information on when part would arrive. I asked for Customer service to reach out for more details and they balked, did not want to do anything. I insisted and the result was an email stating no idea. No further info from anyone. I figured my next step was to ask for a refund but figured it would not be refunded. I then found a "dead" engine and used THAT camshaft for my repair. Weeks later your part arrived with ZERO notice. I should have asked for a refund due to your failure to live up to your hype. ZERO stars for this junk. Will NOT ever use you again.
Parts Used:
Camshaft
  • Dan from Millstone Twp, NJ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
3 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Grandson lost the ignition key to my Toro!
No repair, lol! Just a perfect fit for my ignition :). I bought two in case my grandson gets curious again.
Parts Used:
Key-Ignition
  • Michelle from AYLETT, VA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
8 of 21 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!