Models > 37511KBSARWW

37511KBSARWW General Electric Refrigerator - Overview

Get Parts and Repair Help for 37511KBSARWW

If you know the refrigerator repair part you need, you can browse the list of all parts on the 37511KBSARWW, or you can search by name or part description. You can also find your part by where it is located on the 37511KBSARWW by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for 37511KBSARWW parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the 37511KBSARWW [Viewing 3 of 3]

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.82

Light Bulb - 40W

Sold individually.

$53.57

Evaporator Fan Motor

This evaporator fan motor is located in the back of the freezer and circulates air over the refrigerator coils. These coils will convert the heat into cool air, which is then circulated.

$2.14

Evaporator Fan Grommet - Red

$9.20

Door Fixed Shelf

$2.79

Evaporator/Condensor Fan Grommet

$1.48

Compression Ring

$7.27

Door Fixed Shelf - White

$46.12

Vegetable Drawer Shelf Frame

Frame only. Glass NOT included.

$11.54

Package of 12 Screws

$20.09

Run Capacitor

This part helps the compressor kick on and off while maintaining a constant temperature to keep things frozen in your freezer.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Freezer Fan

  • Customer: Luis from College Station TX
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers, Socket set
  • 67 of 70 people found this instruction helpful
I removed two srews from the back panel inside fthe reezer compartment and the two that hold the air manifold/baffle? and pulled the baffle out. Then, I removed the two srews that hold the front part of the fan bracket behind the baffle and the back panel came out easily. Two more screws and one quick connect plug attached to the fan and I was done with remo... read more

Refrigerator had a blown Overload PTC

  • Customer: Paul from Stillwater MN
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 33 of 43 people found this instruction helpful
I indered the right part. The hardest aspect of the repair was finding any information about what wire to attach where. There is one orange and one black wire that goes into the PTC from the fridge.
After speaking with an appliance expert at a local appliance store (not where I bought the part) they helped me out.
Next time, I would just pay the... read more

Fridge smelled like something electronic was burning

  • Customer: BENJAMIN from LAKESIDE CA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver
  • 28 of 31 people found this instruction helpful
Removed the back cover of the fridge with it still pluged in. The next time the compressor tried to kick on, a small piece of black plastic next to the black tank caught fire, and then went out. I unpluged the fridge, unpluged the two wires feeding the black box. Then the box unpluged from the tank. I searched on the internet for the part using the model... read more