Quick Question!

Have you ever purchased from PartSelect.com before?

Models > 37-1039-23-03

37-1039-23-03 Tappan Range - Overview

Get Parts and Repair Help for 37-1039-23-03

If you know the range repair part you need, you can browse the list of all parts on the 37-1039-23-03, or you can search by name or part description. You can also find your part by where it is located on the 37-1039-23-03 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for 37-1039-23-03 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$17.15

Bake Element - Push On Terminals - 240V

The terminals on the element are male quarter inch spade connectors. This part is found on the bottom of the oven.

$5.26

Drip Bowl - 8"

This part is located beneath the element and catches any spills.

$6.00

Rear Drawer Glide

Sold individually.

$4.44

Front Drawer Glide

Sold individually.

$8.01

Terminal Block Kit

This surface burner terminal block kit comes with interchangeable mounting brackets, ceramic wire nuts, heat shrink protective tubing and wires.

$11.68

Surface Element - 8" - 220V

4 Turn.

$6.59

Drip Bowl - 6"

This six inch heavy chrome drip bowl is compatible with electric ranges that utilize plug-in surface burners. This bowl has a narrow 3/8 inch lip.

$6.13

Main Terminal Block Kit

Terminal blocks (also called terminal boards or strips) provide a convenient means of connecting individual electrical wires.

$23.51

Surface Element - 6"

Sold individually.

$18.07

Broil Element

This broil element is found on the roof of the oven.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Oven woudn't heat

  • Customer: David from Shawnee, KS
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 903 of 934 people found this instruction helpful
1. Removed two screws, pulled out the element, voltage tested the element and determined it was an open circuit (bad element).
2. Ordered the part from partselect.com
3. Disconnected element, connected the new one, and screwed it back in. read more

Element cracked in two pieces

  • Customer: Michael from Green Bay, WI
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 650 of 744 people found this instruction helpful
Shut off circuit breaker to stove and collected the tool from the basement. Turned on flashlight. Unscrewed the two hex nuts from the old element/back of the oven. Slid the old element prongs out of the back, exposing the connecting wires. Pulled the connecting wires off of the old element, carefully, so that the connections wouldn't come off of the w... read more

drawer glides were broke on front and back

  • Customer: bryan from sparta, WI
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 513 of 524 people found this instruction helpful
used a screwdriver pushed the old ones out put the new in. the video instructions were great. read more