Models > 3521XRW > Instructions

3521XRW Magic Chef Range - Instructions

All installation instructions for 3521XRW parts

These instructions have been submitted by other PartSelect customers and can help guide you through the range repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the 3521XRW
256-270 of 315
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Oven light Switch

  • Customer: William from APACHE JUNCTION AZ
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers
  • 0 of 0 people found this instruction helpful
Compressed the springs and removed the damaged switch, then changed the wiring over to the new switch and press into place, worked fine.

Bake unit shorted out

  • Customer: Lloyd S. from Flint MI
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Unpluged oven, removed two screws, pulled out old unit about 6" removed wires. put new unit in oven connected the two wires, carefully pushed it back till mounting brackets lined up with holes replaced screws done. preformed a 400deg test as per repair vidio sugested. Passed.

oven did not heat

  • Customer: Brad from Chillicothe IL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
replaced the heating eliment

burner would go to high when turned on

  • Customer: James from Fairmont WV
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Pulled stove out to unplug. Removed screws holding end covers then remove screws on the underside of cover as you face the stove top.Remove knobs.Pull bottom cover forward and up so you can lift it off to see the insides.Remove wires and attach to the new part one at a time. Unscrew old from the front and attach the new one.Put it back together.Done.

After cooking dinner, using the oven, it started to make a horrific noise and flashed bright, almost welding sparks bright. I thought it was on fire, and realized the baking element was on fire and was burning straight thru..

  • Customer: sue from newcomerstown OH
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
i unplugged the stove, waited for it to cool.. took a screwdriver and unscrewed the two screws attaching it to the back of the oven.. unclipped the connectors.. got online, after looking up the serial number and purchased a new one.. the part came in 3 days, clipped the ends onto the connectors, shoved them thru the holes in back of oven, and screwed both of them back into the back of the oven.. and wala, ready to bake!!! yippee! on a sidenote.. we did not use the stove top while the baking element was unattached.. (watch the video) hope this was helpful :)

broken bake bake element

  • Customer: charles from addison IL
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Socket set
  • 0 of 0 people found this instruction helpful
removed screws slid element out diconnected electric terminals reconnected terminals to new element slid back in replaced screws turned oven on sucess

Terminal block arc'ed because a wire had become loose.

  • Customer: Larry from Scranton KS
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
Ordered and received the terminal block. Installed it along with a new 220V power cord and the appropriate insulator . Ensured the terminals were tight with a nut driver. Reinstalled cover. Then, using the control panel, I did a function check on all the heating elements, clock, oven light, to satisfy all operational requirements. All checked good! And, I was relieved that the control panel had not been shorted out as the terminal block was due to a loose connection. Easy fix.

heating coils would not work

  • Customer: Adam from Kempner TX
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
Remove heat coils, take body of coil inserts out, remove screws from body, cut old receptacle out, tie new recptacle wires to the old piece of left over wires using wire nuts, and reassemble body, insert heating coils and test.

burned out bake element

  • Customer: Leonard from Pittsford NY
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
followed your excellent video and the job was a breeze Thank you !

Elements did not fit properly.

  • Customer: myrna from homestead FL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Ordered the parts, installed.

lost heat to oven - bake element went out

  • Customer: judy from greentown IN
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
shut power off to range. removed oven shelves to make getting old element out a lot easier. removed screws that hold old element to back of oven - carefully pulled old element out about 3-4 inches. pulled power connectors off end of element. then installed new element in reverse order. Very easy to do. My wife could have done,but she does baking. I do the repairing. Thank-you for such great service. Greentown joe

oven element burned out

  • Customer: betty from tulsa OK
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers
  • 0 of 0 people found this instruction helpful
turned breakers off unscrewed two screws, removed old element.Reattached wires on new element,put two screws back in. flipped breakers back on and its good to go.

element had burned out

  • Customer: John from Key West FL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
number 1 was to shut off circuit breaker. Just removed 2 screws pulled out element slowly to expose wire terminals, removed wires carefully so terminal was not damaged. Replace element was spot on so install was in less than 5 min.

replace the cook stove's drip bowls instead of cleaning them

  • Customer: Dallas from Arlington TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
I removed the burners and then the older drip bowls of the cook stove--and then I put on the new drip bowls and put back on the burners. My mechanical skills were sufficient for the replacement of the drip bowls.

burned out switch

  • Customer: KENNETH from DEEP RUN NC
  • Difficulty: Really easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
killed power...removed back of stove...removed switch and replaced it..reinstalled back...powered up
All Instructions for the 3521XRW
256-270 of 315