Quick Question!

Have you ever purchased from PartSelect.com before?

Models > 3521XRW > Instructions

3521XRW Magic Chef Range - Instructions

All installation instructions for 3521XRW parts

These instructions have been submitted by other PartSelect customers and can help guide you through the range repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the 3521XRW
196-210 of 318
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

old element broke

  • Customer: paul from davie, FL
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 1 people found this instruction helpful
unscrew 2 screws, pull 2 connectors off, put in new part in reverse order - easy fix.

Bowl -Drip and gasket

  • Customer: Walid from Worcester, MA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 1 people found this instruction helpful
it was relay easy when you get the right pats .so
Thanks for .
PART Select.
Best regard .
Walid

oven would not heat

  • Customer: Betty Mae from Canton, OK
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 1 people found this instruction helpful
1. Turned off electricity to oven.
2. Unscrewed old oven element. Found it had burned through
on the underside.
3. Inserted & screwed in new oven element.

35 year old oven good to go.

Element broke

  • Customer: Randy from Walker, LA
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 1 people found this instruction helpful
Unscrewed two screws holding element in place and pulled off the electrical wires to the element.( be sure to remove power to the stove)Put wires on new element and installed screws back in. Done

The oven did not heat up. I noticed the element was cracked.

  • Customer: Bill from Valhalla, NY
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 1 people found this instruction helpful
I watched the video provided by Part Select before I ordered the part. I removed the old element by taking out two screws and unplugging it from the wires. I put the new element in place, connected the wire to the right side and then opened up the back of the range to connect the left side. The repair was easy, but the video did not show that you had to connect the left side from the rear of the appliance. It was easy to figure out. The appliance works like a charm...no like an oven.

surface element burnout

  • Customer: david from wellsboro, PA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 1 people found this instruction helpful
The repair was just a matter of sliding the old one out and plugging the new one in. The ease of use of this website was wonderful. Super fast shipment. Im very pleased.

burner bad

  • Customer: irene from Lower Burrell, PA
  • Difficulty: Really Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 0 of 1 people found this instruction helpful
replaced burner element

Old surface element burned out.

  • Customer: Royce from Rio Rancho, NM
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 2 people found this instruction helpful
I ordered and received the replacement element, then unplugged the old one and plugged in the new one.

Job done.

Replace oven bake element

  • Customer: Lori from Scottsdale, AZ
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 2 people found this instruction helpful
After watching the instruction video on your website, it was a piece of cake. Turned off circuit breaker, removed the old element that was in 2 pieces because of a fire, and installed the new element. Couldn't be easier. Saved a bundle of money.

elements busted

  • Customer: shanon from kyle, TX
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 1 of 5 people found this instruction helpful
the new elements were super easy to replace. the old ones just pulled out and the new ones easily pushed in. the top one was a little more difficult only because it had brackets that had to be slid of and then slid onto the new one.

Oven bake element broke in half.

  • Customer: Annette from Denham Springs, LA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 0 of 2 people found this instruction helpful
First my husband turned off the breaker to the oven.
Secondly took the racks out of the oven. Then he re-
moved the two screws that hold the element in place.
He pulled the element out about 3 inches and used
the pliers to disconnect the old element. He plugged
the new element into the wires and checked to make
sure they were snug. Then he put the screws back
in, turned the breaker back on, and turned the oven
on. Presto! The oven is back in business!

Oven Backing Element

  • Customer: Scott from Mukilteo, WA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 0 of 2 people found this instruction helpful
My mother-in-law called with here oven not working. I went over and got the model number off the stove. Came home and went on the internet and typed in the number on a Google search and came up with your site. It took me to the diagrams of the specific oven and showed me all the parts. When I had selected the part the site also showed me a video of how to replace the part. This gave me confidence to order the part and do the repair myself. First turn off the power at the breaker. Two screws, two clips removed. A little time in cleaning up the dust from a burned out element, then two clip reattached and two screws to secure the element and a test to see that it heats and I was done. Everything went as planned. My Mother-in-law thinks I am wonderful. Thank You Part Select...

The burner was shortening out and would work sometime. The first time I replace the burner but the new one shorted out quickly.

  • Customer: shawn from Vancouver, WA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers
  • 0 of 2 people found this instruction helpful
I unplugged the stove. Took out the burner and removed receptacle by pulling it out of the bracket and clipping the wires. One thing you want to make sure is that when you clip the wires from the receptacle you're replacing you leave enough wire so that you can connect them to the wires on the new receptacle when it is in place on the stove. I had just enough but would have liked more. The bracket I received didn't match the one on the stove so I used the one on the stove since the receptacle itself was the same as the one I was replacing.

Broken leveling leg.

  • Customer: Don from Crestwood, MO
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers
  • 0 of 0 people found this instruction helpful
This is a no brainer. I am only doing this because you asked. Pull out the stove, tilt it back, remove broken leg, install new leg.

Stove would not heat up.Guessed it was element

  • Customer: Jean from CliftoN Park, NY
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Pulled stove well away from wall - took plug out of socket..Phillips screwdriver. Slotted element into wire thing-y - one connector fell down the back, so had to take back off the stove. Used tweezers to pull wire back into back of oven. Screwed plate over wire.Was thrilled when I turned stove on and element shone brightly. Husband away so had to do it myself. Had a glass of wine.
All Instructions for the 3521XRW
196-210 of 318