Models > 32-1012-57-05

32-1012-57-05 Frigidaire Range - Overview

Get Parts and Repair Help for 32-1012-57-05

If you know the range repair part you need, you can browse the list of all parts on the 32-1012-57-05, or you can search by name or part description. You can also find your part by where it is located on the 32-1012-57-05 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$12.23

Burner Grate

Sold individually.

$39.80

Spark Module - 120V

This part sends enough current to the igniter to create a spark to the bottom of the burner cap.

$44.29

Door Hinge - Right Side

$29.90

Long Ceramic Igniter Assembly

$44.80

Door Hinge - Left Side

$6.93

SCREW-LEVELING

$7.25

Hex Nut

$3.41

CLIP

$32.82

Front Burner

$29.32

IGNITOR-TOP BURNER

Common Symptoms of the 32-1012-57-05 [Viewing 1 of 14]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

My burners would not light. There wasn't the tell tale "click, click, click" of the spark module.

  • Customer: Jonathan from Arkport NY
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 11 of 16 people found this instruction helpful
First I had to slide the stove out of its cubby and then I removed the two screws holding on the shield. I next removed the wires going to the spark module. I removed the top screw and loosened the bottom one. Installed the new spark module in reverse order. Less than 15 minutes for whole repair. Still have problems with spark module not working if oven... read more

tHE ORIGINAL MODULE DIED AFTER 21 YEARS OF SERVICE

  • Customer: Jose from El Paso TX
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 8 of 13 people found this instruction helpful
First had to move the stove out of its "nest", take the side cover off, remove 1 screw and loosen the other , take the old module out and reverse the operation. That simple.
Part was supplied 1 day before promised date, awesome. Part fitted exactly as the OEM part, works like a charm, everyone happy. read more

Grates were old and rusted and scratching the bottom of my pots

  • Customer: Sue Z from Los Angeles CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 4 of 5 people found this instruction helpful
I threw the old ones out and replaced them with the new ones. It was a no-brainer :) The parts arrived super fast. Great, no hassle service. read more