Quick Question!

Have you ever purchased from PartSelect.com before?

Models > 32-1012-00-13

32-1012-00-13 Tappan Range - Overview

Get Parts and Repair Help for 32-1012-00-13

If you know the range repair part you need, you can browse the list of all parts on the 32-1012-00-13, or you can search by name or part description. You can also find your part by where it is located on the 32-1012-00-13 by selecting a section below. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Burner Grate

Sold individually.


Touch Up Paint - White

This 18 ml bottle of white appliance touch up paint is a little over two inches tall. It can be used for refrigerators, microwaves, ranges, clothes dryers, and freezers.


Door Hinge - Left Side


Main Top


Door Hinge - Right Side


Thermostat Bulb Clip


Hex Nut


Long Ceramic Igniter Assembly




Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

the old top was cracked and rusted

  • Customer: Richard from Brooklyn, NY
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 11 of 11 people found this instruction helpful
The new part arrived quickly and well-packaged. Removing the old top was easy enough, but needed to remove the legs (that hold it in an open position for cleaning) from the old top. The sheet metal screws holding one of them in place were rusted in place. Had to loosen with WD-40 and vice grips, but got them off without breaking or stripping the threads. The... read more

needed a new top-mine was so chipped.

  • Customer: Janice from Geneva, OH
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 10 of 12 people found this instruction helpful
I propped up the old one, the way you do to clean under the top, and removed the screw on either side of the prop up post. I slid off the top and then removed the vent so I could clean it and put it on the new top. I replaced the vent into the new one, put the props back in and then the screws. It may have gone faster for someone else-I am a woman of 68 year... read more

Grates were old and rusted and scratching the bottom of my pots

  • Customer: Sue Z from Los Angeles, CA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 4 of 5 people found this instruction helpful
I threw the old ones out and replaced them with the new ones. It was a no-brainer :) The parts arrived super fast. Great, no hassle service. read more