Quick Question!

Have you ever purchased from PartSelect.com before?

Models > 32-1012-00-04

32-1012-00-04 Tappan Range - Overview

Get Parts and Repair Help for 32-1012-00-04

If you know the range repair part you need, you can browse the list of all parts on the 32-1012-00-04, or you can search by name or part description. You can also find your part by where it is located on the 32-1012-00-04 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$10.65

Burner Grate

Sold individually.

$7.53

Touch Up Paint - White

This 18 ml bottle of white appliance touch up paint is a little over two inches tall. It can be used for refrigerators, microwaves, ranges, clothes dryers, and freezers.

$111.22

Main Top

$42.46

Spark Module - 120V

This part sends enough current to the igniter to create a spark to the bottom of the burner cap.

$49.09

Door Hinge - Left Side

$48.95

Door Hinge - Right Side

$8.05

Hex Nut

$37.87

Long Ceramic Igniter Assembly

$3.81

Thermostat Bulb Clip

$34.73

Front Burner

Common Symptoms of the 32-1012-00-04

[Viewing 1 of 1]
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

My burners would not light. There wasn't the tell tale "click, click, click" of the spark module.

  • Customer: Jonathan from Arkport, NY
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 13 of 18 people found this instruction helpful
First I had to slide the stove out of its cubby and then I removed the two screws holding on the shield. I next removed the wires going to the spark module. I removed the top screw and loosened the bottom one. Installed the new spark module in reverse order. Less than 15 minutes for whole repair. Still have problems with spark module not working if oven... read more

the old top was cracked and rusted

  • Customer: Richard from Brooklyn, NY
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 10 of 10 people found this instruction helpful
The new part arrived quickly and well-packaged. Removing the old top was easy enough, but needed to remove the legs (that hold it in an open position for cleaning) from the old top. The sheet metal screws holding one of them in place were rusted in place. Had to loosen with WD-40 and vice grips, but got them off without breaking or stripping the threads. The... read more

needed a new top-mine was so chipped.

  • Customer: Janice from Geneva, OH
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 9 of 11 people found this instruction helpful
I propped up the old one, the way you do to clean under the top, and removed the screw on either side of the prop up post. I slid off the top and then removed the vent so I could clean it and put it on the new top. I replaced the vent into the new one, put the props back in and then the screws. It may have gone faster for someone else-I am a woman of 68 year... read more