Models > 31FA 1K Maytag

31FA-1K Magic Chef Range - Overview

Get Parts and Repair Help for 31FA-1K

If you know the range repair part you need, you can browse the list of all parts on the 31FA-1K, or you can search by name or part description. You can also find your part by where it is located on the 31FA-1K by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for 31FA-1K parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the 31FA-1K [Viewing 4 of 4]

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.82

Light Bulb - 40W

Sold individually.

$52.17

Flat Style Oven Igniter Kit

The flat style gas oven igniter included in this kit has a body length of 3-3/4 inches. This kit comes with all of the pieces you need to replace longer ceramic igniters, though this kit can also replace short igniters. This igniter has an amperage range of 3.3 - 3.6 and does NOT replace round style oven igniters.

$2.70

Screw

This screw is sold individually.

$15.82

Burner Knob

Sold Individually.

$23.07

Thermostat Knob

$121.57

Safety Valve - 3.3 to 3.6 amps

This safety valve ensures that no gas is released until the igniter has received the proper voltage needed to ignite the gas range.

$133.86

Oven Thermostat Kit

This oven thermostat kit is to be used with gas oven models with a flat ignitor. Many thermostats do look similar. The knob has been updated by the manufacturer and may not look t...

$68.30

Oven Rack

Sold individually.

$37.87

Top Burner Spark Ignition Electrode

Sold Individually. Order quantity required.

$86.49

USE WPL 74006282

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Oven would not work but the Broiler did

  • Customer: James from Ferndale MI
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers, Socket set
  • 130 of 137 people found this instruction helpful
The oven had been working intermittently for a while and after repeated threats of starvation from my spouse I finally took a look even though it was summer and the grill was working fine. The Igniter would glow red when the oven was turned on but the gas would not flow to it no matter what the temperature setting. I searched online and found this site that ... read more

Oven would'nt light

  • Customer: Charles from Charlestown RI
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers, Screw drivers
  • 63 of 69 people found this instruction helpful
In most cases if your oven won't light or takes a long time to light you may have a bad igniter even if it glows. To check the igniter use a voltmeter to check for 120 A/C volts going to the igniter and3.5 A/C volts going between the ingniter and the gas valve. My bad ingniter glowed but had only only 3.0 A/C volts going to the gas valve for the oven. The ne... read more

oven failed to light

  • Customer: Beryl from Dawsonville GA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 35 of 38 people found this instruction helpful
My son replaced the broiler igniter this spring, so I had a clue as to what was required. This was even easier and since I had back surgery recently & my husband was out of town that was a giant plus!

I unplugged the oven, removed the oven door, found the release latch and removed the oven floor. I then removed the 2 screws that held the ignit... read more