Quick Question!

Have you ever purchased from PartSelect.com before?

Models > 31100PAW

31100PAW Magic Chef Range - Overview

Get Parts and Repair Help for 31100PAW

If you know the range repair part you need, you can browse the list of all parts on the 31100PAW, or you can search by name or part description. You can also find your part by where it is located on the 31100PAW by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for 31100PAW parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$37.04

Drip Pans - Kit of 4

This set of four square chrome drip pans fits many gas ranges and cooktops. Each drip pan has sides measuring just over eight inches and a center hole diameter of three and a half...

$5.61

Door Handle Spacer Kit

This door handle spacer assembly contains two screws and two spacers.

$25.23

HINGE- DRA

$132.35

KIT- VALVE

$36.98

PILOT- OVE

$4.94

Wing Nut

$4.79

TUBING- OV

Oven Thermostat

This part establishes and maintains the internal temperature of the oven cavity.

Oven Safety Valve Kit

Door Glass Clip

This clip is sold individually. It is used to fasten the door glass.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

worn out door seal

  • Customer: Stella from Charlotte, TN
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers
  • 22 of 23 people found this instruction helpful
removed old clips and remaining parts of old seal...new part already had clips attached, so just snapped them into holes in oven door. read more

Oven rack lost in a garage fire

  • Customer: Bob from Saint Clair Shores, MI
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 24 of 30 people found this instruction helpful
First I opened the door to the oven. Then I opened the box that the part came in. (knife) I then slid the oven rack out of the box and unwrapped the plastic, being careful not to bend or scratch the new rack. Now, this is the tricky part... I had to move the existing rack down one space to make room for the new one. Then carefully slid the new rack in, ... read more

Pilot Light Won't Stay Lit

  • Customer: Peter J from Brooklyn, NY
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers, Wrench (Adjustable)
  • 22 of 26 people found this instruction helpful
First I removed the oven door by pulling straight up off of the hinges in the open postion. Next remove oven racks,then use 1/4 nutdriver to remove back screws on inside oven bottom plate. Next remove gold nut on silver tube @ pilot connection,then remove 1/4 nuts that hold pilot assembly. Next open top of stove and remove small gold nut "with the thin wir... read more