Models > 31000PAWT > Instructions

31000PAWT Magic Chef Range - Instructions

All installation instructions for 31000PAWT parts

These instructions have been submitted by other PartSelect customers and can help guide you through the range repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the 31000PAWT
31-36 of 36
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

enamel on old panel was destroyed...

  • Customer: Lee from Truckee CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
take out the old, put in the new !.. wanted to do the same with the oven racks, but $100 for 2 seem to me as gouging, other than that = satisfied....great web site.... woody

Door seal was pulled out by grandson.

  • Customer: Michael P from Hickory Hills IL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers
  • 0 of 0 people found this instruction helpful
finished removing door seal, used pliers to remove old securing studs. positioned new seal and pushed securing studs into existing holes and was done.

As easy as it could be

  • Customer: Phillip from Twentynine Palms CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers
  • 0 of 0 people found this instruction helpful
I have worked in maintenance field most of my adult life and all aspects and to change the oven door gasket was no challenge what so ever. It took longer to find my needle nose pliers to remove the old gasket clips and then re-install the new gasket. Maybe 10 minutes total

Missing Oven Rack

  • Customer: Janine from Hatfield PA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
I think the installation instructions are fairly self explanatory. This is the second item I've ordered from Parts Select and I'm thrilled with their service. The items are always less expensive than other sites and they deliver what they promise. I would highly recommend them.

cracked and missing paerts of the seal

  • Customer: Cynthia from Petersburg IL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Popped in there real quick. Wish I would have done it sooner, my oven heats up much faster.

leg was bent, also metal receiving bracket bent

  • Customer: Virginia from Oceanside CA
  • Difficulty: Really easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Wrench(Adjustable)
  • 0 of 0 people found this instruction helpful
Removed stove from slot in wall. Bent rear left leg would not unscrew due to bent metal bracket. Used hacksaw to cut out leg, then straightened metal bracket with small hammer and was able to screw new leg in and adjust height by using level on stove before reinserting stove its slot. Recheck level after pushing back in place and adjust front legs if necessary. If not for bent metal receiving bracket, would have taken much less time. Still easy tho. R'cvd part in two days. Very quick.
All Instructions for the 31000PAWT
31-36 of 36