Models > 31 3978 23 01

31-3978-23-01 Frigidaire Range - Overview

Get Parts and Repair Help for 31-3978-23-01

If you know the range repair part you need, you can browse the list of all parts on the 31-3978-23-01, or you can search by name or part description. You can also find your part by where it is located on the 31-3978-23-01 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for 31-3978-23-01 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$3.51

Drip Bowl - 8"

$5.99

Terminal Block Kit

This surface burner terminal block kit comes with interchangeable mounting brackets, ceramic wire nuts, heat shrink protective tubing and wires.

$22.08

Surface Element - 8" - 2600W

This coil element has looped terminal ends.

$4.54

Drip Bowl - 6"

This six inch heavy chrome drip bowl is compatible with electric ranges that utilize plug-in surface burners. This bowl has a narrow 3/8 inch lip.

$15.25

Surface Element - 6"

This element has looped terminal ends and comes with a black medallion center.

$26.93

Broil Element

This broil element is found on the roof of the oven.

$26.82

SUPPORT

$5.71

SCREW

$29.14

Thermostat Knob

This knob accepts a D-shaped shaft.

$26.04

MEDALLION

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

burner shorted out

  • Customer: David from Encinitas CA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 37 of 39 people found this instruction helpful
I followed the directions by clipping wires to old burner socket, splicing the wires to new terminal block, screwing down new "block bracket," and plugging in new burner. read more

corroded terminals

  • Customer: Gary from hollywood FL
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required:
  • 11 of 12 people found this instruction helpful
was more of a job of splicing wires together than anything else. Loved the heat shrink electrical tubing
to put over the wires for insulation. used a hair
dryer. must buy more of that amazing stuff read more

Broiler element burned out

  • Customer: louis from cuba NY
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Socket set
  • 8 of 9 people found this instruction helpful
Remove old element by removing two screws on back wall of oven, pull attached wires out about 6" and disconnect. Reverse to install, very easy. Of course the oven door makes it harder to get at things, but it all worked out. Partselect was the only place I could find the element since the stove is 18 years old. I love keeping appliances going as long as poss... read more