Models
>
30-6266-00
30-6266-00 ((01)) Tappan Range - Overview
Sections of the 30-6266-00
[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
Drip Pan
PartSelect #: PS454077
Manufacturer #: 5303131115
This drip pan is designed for gas cooktops and ranges. The pan has an approximate diameter of 8 inches, and the hole in the middle has a diameter of roughly 4 inches. The purpose of this part is to ca...
$8.92
In Stock
Burner Grate
PartSelect #: PS437719
Manufacturer #: 316055800
This is a burner grate for your surface burner, and it is compatible with your range stove top. The purpose of this part is to provide a balanced and stable surface for you to set your cookware on whi...
$37.34
In Stock
Gas Spark Ignition Switch
PartSelect #: PS437415
Manufacturer #: 316035200
When the gas burner valve knob is depressed and turned, this part creates a spark that lights the gas and starts the burner
$74.13
In Stock
Flat Style Oven Igniter Kit
PartSelect #: PS468132
Manufacturer #: 5303912586
This flat style universal gas oven igniter kit comes with a bracket that allows this igniter to replace practically all round igniters,as it has all of the same electrical properties as a round Carbor...
$228.45
Special Order
Questions And Answers for 30-6266-00
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the 30-6266-00
[Viewing 1 of 1]
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Two top burners would not light, defective switch
Warning- we found a lot of bare wires in this stove, check your wires before replacing the bad switches. I lifted the top, disconnected the power, pulled off the knobs, unscrewed the switch for the back light, removed seven screws to finally get the front panel off. Once you have the front panel off, changing the swich takes less than a m
... Read more
inute. The switches just slide off the gas valve stems. Instructions show how to line up the new D-shaped switch mechanism to match the D-shaped shaft. Gently pull the two wires off the old switch and slide onto the new switch. Then put the panel back.
Read less
Parts Used:
-
Donald from Middle Village, NY
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
12 of 14 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Very old burner grates & drip pans, need replacement.
Took out the old & easily replace it with the new set. No tools required.
Parts Used:
-
Mariano from Torrance, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
14 of 21 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
original drip pans were rusting on the undersides
Just to point out the pans were delivered within a few days which was very quick. I just dropped them in. They fit perfect. Thank You for no stress.
Parts Used:
-
Sandra from Okeene, OK
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
9 of 11 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!