Models > 30-4988-66-05

30-4988-66-05 Tappan Range - Overview

Get Parts and Repair Help for 30-4988-66-05

If you know the range repair part you need, you can browse the list of all parts on the 30-4988-66-05, or you can search by name or part description. You can also find your part by where it is located on the 30-4988-66-05 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for 30-4988-66-05 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Rear Drawer Glide

Sold individually.


Front Drawer Glide

Sold individually.


Flat Style Oven Igniter

This flat style gas oven igniter has an amperage range between 3.2 to 3.6. This part comes with two ceramic wire nuts.


Oven Rack

Sold individually.


Light Bulb

This 40 watt appliance light bulb are used for some ranges, refrigerators, and microwaves. They are sold individually.


Oven Light Socket


Spark Module - 120V

This part sends enough current to the igniter to create a spark to the bottom of the burner cap.


Gas Spark Ignition Switch

When the gas burner valve knob is depressed and turned, this part creates a spark that lights the gas and starts the burner


Control Knob

Sold individually. This knob accepts a D-shaped shaft.


Dual Oven Safety Valve

Used for both bake and broil. This part makes sure that no gas is released until the igniter gets enough power to ignite the gas range.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

drawer glides were broke on front and back

  • Customer: bryan from sparta WI
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 495 of 501 people found this instruction helpful
used a screwdriver pushed the old ones out put the new in. the video instructions were great. read more

Oven quit heating.

  • Customer: John from Darlington SC
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver
  • 450 of 476 people found this instruction helpful
After reading up on the problem of the gas oven not lighting I decided I needed to install a new igniter. I had read where some people just pulled a panel off the back and installed a new one.. yeah, no such luck with this model so I had to crawl into the broiler drawer space [which I had to clean out first]. Note, if you wear trifocal glasses you might as ... read more

broken slide

  • Customer: Joseph D. from Stuart FL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 365 of 369 people found this instruction helpful
Pulled broken one out, slid in the new. Most unbeliveable service I have ever received. Tremndous job, you should sell it to others, Many thanks read more