Models > 2ET22DKXJW01

2ET22DKXJW01 Whirlpool Refrigerator - Overview

Get Parts and Repair Help for 2ET22DKXJW01

If you know the refrigerator repair part you need, you can browse the list of all parts on the 2ET22DKXJW01, or you can search by name or part description. You can also find your part by where it is located on the 2ET22DKXJW01 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for 2ET22DKXJW01 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$53.82

Crisper Pan

$3.96

End Cap Trim Piece

$7.87

Light Rocker Switch

$51.29

Meat Drawer

$2.70

SCREW

$7.82

Door Shelf End Cap - Left or Right Side

Sold Individually.

$28.68

Door Shelf Bin

This part may differ in color, but is functionally the same. It's no longer available in clear.

$5.25

Touch-Up Paint - White

$33.08

Door Shelf Retainer Bar

$2.70

SCREW

Sold individually.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Temperature unstable

  • Customer: Duane from Albany OR
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver
  • 41 of 52 people found this instruction helpful
Open the door. Removed two screws holding the cover of the thermostat. There is a clip which holds the thermostat in place. Remove the clip. Take out the thermostat. Remove the thermocouple (the long grey metal with the coil at the end) which is also held in place by a clip. Replace with the new thermostat and thermocouple and clip into place. Replace t... read more

Lights inside refrigerator not working

  • Customer: Clint from Rayville MO
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 38 of 46 people found this instruction helpful
I used a flat-head screwdriver to pop out the old light rocker switch. Then, I unplugged the wires, plugged them into the new light rocker switch, and then popped the new switch into the hole. That's it! Lights began working again. read more

Drawers were cracked, trim had fallen off.

  • Customer: Julie from Oak Park MI
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 34 of 42 people found this instruction helpful
No need for tools. read more