Quick Question!

Have you ever purchased from PartSelect.com before?

Models > 2ET18NMXJW01

2ET18NMXJW01 Whirlpool Refrigerator - Overview

Get Parts and Repair Help for 2ET18NMXJW01

If you know the refrigerator repair part you need, you can browse the list of all parts on the 2ET18NMXJW01, or you can search by name or part description. You can also find your part by where it is located on the 2ET18NMXJW01 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for 2ET18NMXJW01 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the 2ET18NMXJW01

[Viewing 6 of 6]
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$117.55

Replacement Ice Maker

***NOTE: Ice maker does NOT come with the bail or shut off arm. Must order them separately if required. It does come complete with flat and round plug wiring harness, the mountin...

$56.37

Crisper Drawer

This crisper drawer is clear plastic. Sold individually.

$11.43

Light Rocker Switch

This light switch is triggered by the door opening and closing.

$10.76

Door Shelf End Cap - Left or Right Side

Sold Individually.

$4.67

End Cap Trim Piece

Sold individually.

$16.11

Crisper Drawer Rail

This part goes in the center of the crisper shelf and acts as a support.

$16.15

Water Fill Cup and Bearing

$11.64

Ice Pan

This part may come in white or clear plastic, but either will still work and fit properly in your appliance.

$20.80

Compartment Door

$2.76

Screw

Sold individually.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Ice Maker quit working, I could manually cycle unit but then the water would overflow when unit was re-filling.

  • Customer: Max from Green Castle, IN
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 558 of 574 people found this instruction helpful
I backed out the 2 top screws about a quarter inch and then removed bottem screw with a quater inch nut driver. I then lifted Ice Maker clear of the two top screws and lowered it enough to unclip the power connection with a small screwdriver. The new Ice Maker was wired correctley for my refrigeator so all I had to do wea reconnect the power connection and... read more

No Ice in the Ice Maker

  • Customer: Chris from Duluth, GA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Socket set
  • 164 of 181 people found this instruction helpful
I am NOT a handyman, and my family laughed at me when I said I was going to fix the ice maker all by myself. I ordered a replacement ice maker. When it arrived, I opened the box and read the instructions. It seemed easy. I removed the old ice maker, with a socket set. I then took off the shut off lever from the old one and placed it on the new one, sinc... read more

The Bearing Cup Assembly was broken and ice would jamb against it during the ice making cycle.

  • Customer: David from Chester, CA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Screw drivers
  • 94 of 113 people found this instruction helpful
I removed the ice maker from the refrigerator, by removing one screw on the underside bracket and loosening the two screws at the top side, then lifting the ice maker off the loosened screws. I then unplugged the electrical harness that supplies power from the refrigerator to the ice maker. I then disassembled the ice maker by removing the front cover whic... read more