2DATW4305TQ0 Admiral Washer - Instructions

2nd time partselact has saved my ~13 year old washer for a total of ~40$ Entered the symptom and they told me more than likely what to look for and VIOLA ! Would've been easy to spend $200 each time my washer quit working but with a suggestion from a menu and even a video to show me how I revived my old $400 AMERICAN made washer to wash another day. Thank you part select !!

After repair, had to re-align the front head of the cabinet several times to get it to slide in correctly.I saved myself the cost of a repair service call. Followed instructions at the following youtube.

Following the video posted with the part made this repair a piece of cake, well documented, filmed, great explanations of tools needed and how to do it all. This is a fantastic site for do it yourself people with a little bit of mechanical skills. BTW I've been a hvy. eqt. mech. for over 40 years so this is something different to tangle with and a lot cleaner. Thanks so much for your time and consideration in produceing this instructional video, and keep up the excellent work.

Had a laptop with the repair video on next to washer and paused after each set of instructions to complete each task. Went perfectly! Only tricky part was fitting the cover back but eventually got it with a bit of jiggling. Very impressed with the instructional video as everything was where they showed it and came apart exactly as explained and more importantly went back together correctly.

I was thrilled that the agitator parts were so easy to replace, but that didn't totally fix my problem. I looked underneath the washer and found black rubber shavings from a worn part and looked online and found that the problem was most likely the Direct Drive Motor Coupling. I watched the video and ordered the part. The coupling was actually broken. After replacing the part, the washer works great...better than it has in years. I think I will work on our dryer now.

Friend of mine did it well

Follow instructions in part repair video from part select,but put washer on back first to see if can access area without removing the whole outer cover we did not even need to do that step only took 20 minutes to replace coupling. The video was great

We watched the how to video...repair took less than 15 minutes. You can't go wrong if you just watch the easy to follow video! Washer works as good as new.

Tipped the washer on its side and took the pump off then the motor then the coupling.

I purchased the part from PartSelect because it was very reasonable and it was OEM part. I have never replaced this kind of part on a washer so I figured it would take me a while. But PartSelect supplied a video showing the entire repair and that was the only reason I did not struggle with the repair. I will definitely buy any appliance parts I need in the future from PartSelect. Thanks Don

slipped up upper locking collar lifted off cover and removed 7/16 bolt that holds agitator in place. lifted out agitator and installed agitator repair kit. 123 simple. also next day delivery outstanding keep up good work

Disconnected power. Disconnected hot and cold, and drain hoses and placed in a plastic bucket. Pulled cover off the washer. Tilted washer onto its back. Removed 2 clips holding the pump. Disconnected wire harness from motor and removed 2 clips holding motor starting with lower clip. Removed a screw from the upper clip used for shipping. Set motor aside and removed broken pieces of the motor coupler from motor and transmission. The replacement part had a metal sleeve in the center of each white plastic ring. The old part did not. This required tapping the new ring onto both the motor and transmission shafts with a socket and makes for a tight fit. Reversed the process to put everything back together. Some alignment might be necessary to place motor to transmission. I recomment wearing thin work gloves to avoid nicks from sharp edges. I didn't. Washer is spinning again and sounds a lot better.

Watch the video on the part ordering webpage.

The hardest part was understanding how to take the cabinet apart. The "exploded" parts diagrams at PartSelect helped immensely.

followed the video on the web site and repair was amazingly easy. I have two of these machines, and this same part went bad about 1 1/2 year ago, so this time i was ready for everything. Took everything apart, got rid of old broken part, replaced with new, and Bam, washer back up and running, less than 30 minutes, I am limited on space in my basement, so i didn't turn machine on its back, i did it in the upright position, just utilized some wood blocks to hold the motor during part change, and a hand spring clamp to hold pump and hoses out of my way after removing the clips that hold it on. It's not rocket science, if i can do it so can you. Good luck