Models > 28FY-7CXW

28FY-7CXW Magic Chef - Overview

Parts and Repair Help for models starting with 28FY-7CXW

If you know the repair part you need, you can browse the list of all parts for models starting with 28FY-7CXW, or you can search by name or part description. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your . We’ve also included any installation videos we have for 28FY-7CXW parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Models starting with 28FY-7CXW

$2.52

Light Bulb - 40W

Sold individually.

$3.46

Light Bulb - 40W

Sold Individually.

$11.19

Surface Burner Receptacle Kit

This kit comes with one ceramic block, metal bracket, wires, and hi-temp wire nuts.

$5.69

Oven Door Spring

Sold individually.

$37.47

Bake Element

This spade style bake element has push on wire terminals. It is found on the bottom of the oven.

$17.76

Terminal Block

It provides a way of connecting individual electrical wires and offers protection of the device from electrical surges (voltages and/or currents).

$17.23

ANCHOR-TIP

$30.29

Burner Control Switch - 250V

This switch controls both the 6" and 8" surface burners. Shaft is 1" long and had a D-shape.

$3.96

Lamp Retainer Gasket

$13.25

Clock Knob

Sold individually.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Stove top element not working due to bad receptacle.

  • Customer: Richard from Carthage NC
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 94 of 103 people found this instruction helpful
Turned off the power at the breaker box, cut the wires approximately 5 inches from the bad receptacle and removed it after removing one screw. Stripped back the wires about 1/2 inch and attached the new wires with the ceramic wire nuts provided and secured the receptacle back in place with the new screw provided in the kit.
My sister's husband wanted to... read more

Inner Oven Glass broken

  • Customer: David from Wayne NJ
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 19 of 24 people found this instruction helpful
I removed two retainer screws which released the outside panel.
Next I removed 2 screws which hold the middle glass pane from one of its retainer brackets.
The was another panel with 4 screws to remove before reaching the final glass inner assembly.
Once that panel was reoved with the broken glass it was time to put the repacement glass assemb... read more

Burned terminal block and filter board

  • Customer: Joseph from Decatur GA
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers, Socket set, Wrench set
  • 27 of 56 people found this instruction helpful
Removed and replaced above named parts, rewired.Be sure to tighten all nuts that secure wires. I believe this is what caused the problem. read more