Models > 2765^0A

2765^0A Whirlpool Range - Overview

Get Parts and Repair Help for 2765^0A

If you know the range repair part you need, you can browse the list of all parts on the 2765^0A, or you can search by name or part description. You can also find your part by where it is located on the 2765^0A by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for 2765^0A parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$3.96

Drip Bowl - 6"

$5.69

Drip Bowl - 8"

$9.26

Surface Burner Plug-In Block Kit

This newer-style terminal block kit includes two metal brackets, two pre-crimped wires with terminals, two ceramic wire nuts, a heat shrinking tube, and a mounting screw.

$19.70

Surface Burner Knob

Sold Individually.

$2.70

Hex Nut

10-32 hex - Sold Individually - Appliance originally takes 3 of this item.

$57.91

Bake Element

This element has push-on terminals.

$43.32

Delta Frame Surface Unit - 6"

This delta frame surface element with looped terminal ends and has four turns. It carries 1500 watts and is used on some of Whirlpool/Kenmore's brands of electric ranges. The cente...

$51.33

Delta Frame Surface Unit - 8"

This electric range delta frame surface element with looped terminal ends measures eight inches and has five turns. It carries 2600 watts the center medallion is black in color.

$29.90

SWTCH-LITE

DISCONTINUED

Common Symptoms of the 2765^0A [Viewing 1 of 580]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

My stove top is 30 years old. I was down to one knob. I looked up the part by brand and age. the pictures were accurate and the size dimensions were perfect.

  • Customer: Mark from Albuquerque NM
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 7 of 7 people found this instruction helpful
Pulled off the one remaining knob, installed the new ones. One minute and the stove works perfectly. read more

One burner didn't work all the time the other would go red hot

  • Customer: Phillip from Pekin IL
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 7 of 7 people found this instruction helpful
I unplugged the stove from the outlet, then removed the two burners I was going to be working on and the drip pans. Then I raised the top part of the stove and removed the screws holding the plug-in blocks to the stove. Then I cut the two wires going to the old plug-in block and stripped the wires back to match the new wire parts. Then I placed the sleeves o... read more

Broken knobs from highly enthusiastic cleaning ladies...

  • Customer: Heather from Alameda CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 5 of 6 people found this instruction helpful
In my perpetual state of optimism, I hoped that the part description was incorrect and that the cost for the knob was actually a cost for a set of knobs. Woe to the consumer who doubts his own eyes! Yes, you will be paying about $25 after s/h for a single knob- but it matches, it works, it fits, and it takes less than 2 seconds to install, so kudos to the ... read more