Models > 25382

25382 Kenmore Freezer - Overview

Parts and Repair Help for models starting with 25382

If you know the freezer repair part you need, you can browse the list of all parts for models starting with 25382, or you can search by name or part description. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your freezer. We’ve also included any installation videos we have for 25382 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Models starting with 25382

$6.68

Freezer Door Key

This metallic freezer door key is used for most upright or chest freezers.

$4.38

SCREW

$6.43

Single Gasket Retainer Clip

Sold Individually.

$17.84

Door Shelf End Cap Set - Left and Right Side

$6.71

Interior Drain Plug

$7.25

Shelf Support

$27.55

Compressor Start Relay

$3.12

Center Hinge Pin Washer

$4.55

GROMMET

$0.50

Levelling Leg

Common Symptoms of models starting with 25382[Viewing 1 of 1]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

replacement freezer keys

  • Customer: CHARLOTTE from SEDALIA MO
  • Difficulty: Really easy
  • Time to Complete: 30 - 60 mins
  • Tools Required:
  • 9 of 11 people found this instruction helpful
I accidently threw away both freezer keys to our upright Gibson and G.E. Freezers!!!! I had no luck finding replacements locally, so I got on the internet and came across PartSelect.com. I called them on the telephone; and after giving the model numbers of my freezers, the keys were on their way!! I received the keys very quickly and both worked perfectly. ... read more

The freezer door wouldn't stay shut due to two irresponsible children.

  • Customer: Paul from Cape Coral FL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 5 of 8 people found this instruction helpful
We ordered the part, which was a key, tied it on the freezer door handle, locked the door and voila, the problem was fixed. (We still have the children. :-) read more

Compressor was short cycling

  • Customer: Sherman from Tuttle OK
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 5 of 9 people found this instruction helpful
Removed the cowling with a square drive screw driver, removed the spring clip from the cover of the compressor controls with a screw driver, pulled off the old compressor start relay and replaced it with the new part. Since other problems could have caused the compressor to short cycle this was a "replace the part and hope it would work" since that would be ... read more