Models
>
2538191080
2538191080 Kenmore Freezer - Overview
Sections of the 2538191080
[Viewing 3 of 3]Keep searches simple, eg. "belt" or "pump".
Freezer Door Hinge
PartSelect #: PS2581688
Manufacturer #: 297313200
Sold individually.
No Longer Available
COLD CONTROL KIT
PartSelect #: PS9865018
Manufacturer #: 5304496560
This part helps maintain the desired temperature.
$39.29
Special Order
Access Panel Retainer
PartSelect #: PS414912
Manufacturer #: 08017037
Sold individually.
No Longer Available
Wire Basket
PartSelect #: PS453831
Manufacturer #: 5303018277
Used with Chest Freezers.
No Longer Available
Questions And Answers for 2538191080
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the 2538191080
[Viewing 1 of 1]Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Door wasn't closing correctly.
My husband removed the old hinge, by taking out the old screws and the old hinge and attached the new one, by inserting the new hinge and the new screws. It was as easy as 123.
Parts Used:
-
Catrina from Calumet City, IL
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
16 of 19 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Hinge Broken
Took out the screws(8mm). Used pliers to close new hinges. Re-installed the screws with as large washers as would fit(to hopefully prevent the hinges from cracking at the screw holes like the originals did). I like this supplier, part was easy to find, correct part, shipped fast, price was good.
Parts Used:
-
David from Butler, PA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Socket set
8 of 10 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Old hinge was broken
Remove the 6 screws with a 5/16 inch nut driver. Make sure the lid gasket is in full contact all the way around. Remove any ice interfering with the lid gasket mating properly. Install new hinge using the original screws. Have somebody hold up the lid and tighten the spring nut with a deep 1/2 inch socket gradually until the lid stays
... Read more
up by itself.
Read less
Parts Used:
-
Tom from Riverton, WV
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Socket set
5 of 9 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!