Models > 2536580250A > Instructions

2536580250A Kenmore Freezer - Instructions

All installation instructions for 2536580250A parts

These instructions have been submitted by other PartSelect customers and can help guide you through the freezer repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the 2536580250A
196-210 of 234
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Refridgerator not geting cold.

  • Customer: VINCENT from DEPTFORD NJ
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
Just followed the online instruction video .It was very easy.

broken glass

  • Customer: Vincent from Miami Springs FL
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
easy. good.

shelf arms were broken

  • Customer: Mimi from San Antonio TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
The shelf arms fit perfectly --I just popped them into place.

freezer cold--frig was warm

  • Customer: Robert from Chicago IL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
You guys at Partselect are the best!!! Went to your site, typed in my appliance symptoms, and received possible fixes. Ordered the suggested parts (under $50) on a Sunday night and got em Tuesday am. Installed the easiest one first and Voila!!!! Frig is working great. Thanks Bob S

Cracked and broken door shelf retainer bars

  • Customer: Tina from Camden MI
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
I just snapped the new ones in place. I am a very satisfied cutomer. I ordered the parts on Thursday afternoon and they came on Saturday. Excellent service. Thank you!!! Highly recommanded.

Refrigerator section not cooling

  • Customer: Anant from Stone Mountain GA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
Checked defrost timer. It was a shocker: it was completely burnt out. Replaced it with the new part very easily. I thought now it would defrost properly but unfortunately the thermostat also was shot. I had ordered it along with the timer just in case. It was not expensive at all and I saved time but having it with me when I replaced the timer. NOW ALL IS WELL AND REFRIGERATOR SECTION COLLING PROPERLY. THANKS TO VIDEO AND PARTSELECT.

FRIG SECTION TOO WARM,FREEZER OK

  • Customer: LANCE from AURORA CO
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
Using your online troubleshooter, it was probably the defrost timer and/or the defrost thermostat.Both cheap so I ordered both. The online repair videos showed how to replace those parts. Replaced the timer first with no problems. Removed the panel at the freezer back an saw a streak of black smoke on the white panel wall above the thermostat.Good chance this was the failure point.Video also showed how to replace this unit without any problem. Set the temperature control and let the frig run over night.Problem solved!Frig at 38d and freezer at 0d.

Needed another wire shelf

  • Customer: Paula from Madison AL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Quite easy. Opened the box and installed the new shelf. Took about....5 seconds. Got delivery in 3 days....I was shocked. I put PartSelect in my favorites.

no problems

  • Customer: Gabriela from Bellingham WA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
supper easy

door shelf retainer bar was broken

  • Customer: ernest from okeechobee FL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
unsnap the old broken parts and snap in the new one.The easiest repair I've ever made.

Refrigerator was not cooling

  • Customer: Scott from Norman OK
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
Remove 4 screws that hold up overhead controls, this is also the part that holds the light. Unplug the timer and replace. Super simple and runs great now. After you plug it in it may take a few minutes to kick on the compressor but it will. Also I was pleased it was a factory Frigidare part. Price was right.

Broken Door Shelf Retainer Bar

  • Customer: Tiara from Tillamook OR
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
My husband pulled off the broken piece, then snapped the new one into place. Super easy, quick, and saved us money.

door shelf bracket broken in half.

  • Customer: Raymond from Pawtucket RI
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Took less than 1 minute to install. Snap in and DONE. The easiest job ever. Thank You!

Replace the handle mount

  • Customer: RUTH from AUSTIN TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
When I was moving the refrig. handles from one side to the other...I broke one of the mounts. It was SO easy to order from this place, and they ship IMMEDIATELY. Second time I have used them, and am VERY impressed.

It would freeze up or not cool at all, depended where the clock stopped.

  • Customer: Roger from Owatonna MN
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Removed the lower trim panel from front of fridg. and loosened two screws enough to turn it about 1/4 inch so the screw heads were in the larger holes. Pulled it out disconnected the wire connector and transfered the heat shield and screws to the new clock, connected the wire connector and aligned the screws. tightened them and job done. Has worked like new sense. Thanks Roger
All Instructions for the 2536580250A
196-210 of 234