Models > 2536480240D > Instructions

2536480240D Kenmore Refrigerator - Instructions

All Instructions for the 2536480240D
316 - 330 of 435
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
shelf arms were broken
The shelf arms fit perfectly --I just popped them into place.
Parts Used:
Door Shelf Retainer Bar Door Shelf Retainer Bar
  • Mimi from San Antonio, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
rail that held drawer up was broken
removed top shelf from refrigerator,put new rail in slots and tightened screw.Replaced shelf and slid in drawer.
Parts Used:
Drawer Support Rail - Right Side
  • james from harriman, TN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
freezer cold--frig was warm
You guys at Partselect are the best!!! Went to your site, typed in my appliance symptoms, and received possible fixes. Ordered the suggested parts (under $50) on a Sunday night and got em Tuesday am. Installed the easiest one first and Voila!!!! Frig is working great. Thanks Bob S
Parts Used:
Defrost Timer - 60Hz 120V
  • Robert from Chicago, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Cracked and broken door shelf retainer bars
I just snapped the new ones in place. I am a very satisfied cutomer. I ordered the parts on Thursday afternoon and they came on Saturday. Excellent service. Thank you!!! Highly recommanded.
Parts Used:
Door Shelf Retainer Bar
  • Tina from Camden, MI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Right Side Drawer Support Rail
First removed drawer, then shelf. Unscrewed the broken support rail. Attached the new one and screwed it on. Replaced the shelf, slide in the drawer, that's it. Less than 10 minutes.
Parts Used:
Drawer Support Rail - Right Side
  • Richard from East Hanover, NJ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Refrigerator section not cooling
Checked defrost timer. It was a shocker: it was completely burnt out. Replaced it with the new part very easily. I thought now it would defrost properly but unfortunately the thermostat also was shot. I had ordered it along with the timer just in case. It was not expensive at all and I saved time but having it with me when I replaced the timer. NOW ALL IS WELL AND REFRIGERATOR SECTION COLLING PROPERLY. THANKS TO VIDEO AND PARTSELECT.
Parts Used:
Defrost Thermostat Defrost Timer - 60Hz 120V
  • Anant from Stone Mountain, GA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Frig Section Too Warm,Freezer Ok
Using your online troubleshooter, it was probably the defrost timer and/or the defrost thermostat. Both cheap so I ordered both. The online repair videos showed how to replace those parts. Replaced the timer first with no problems. Removed the panel at the freezer back an saw a streak of black smoke on the white panel wall above the thermostat. Good chance this was the failure point. Video also showed how to replace this unit without any problem. Set the temperature control and let the frig run over night. Problem solved!frig at 38d and freezer at 0d.
Parts Used:
Defrost Thermostat Defrost Timer - 60Hz 120V
  • LANCE from AURORA, CO
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
no problems
supper easy
Parts Used:
Door Shelf Retainer Bar Door Shelf Retainer Bar
  • Gabriela from Bellingham, WA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
door shelf retainer bar was broken
unsnap the old broken parts and snap in the new one.The easiest repair I've ever made.
Parts Used:
Door Shelf Retainer Bar
  • ernest from okeechobee, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Refrigerator was not cooling
Remove 4 screws that hold up overhead controls, this is also the part that holds the light. Unplug the timer and replace. Super simple and runs great now. After you plug it in it may take a few minutes to kick on the compressor but it will. Also I was pleased it was a factory Frigidare part. Price was right.
Parts Used:
Defrost Timer - 60Hz 120V
  • Scott from Norman, OK
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
Broken Door Shelf Retainer Bar
My husband pulled off the broken piece, then snapped the new one into place. Super easy, quick, and saved us money.
Parts Used:
Door Shelf Retainer Bar
  • Tiara from Tillamook, OR
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
door shelf bracket broken in half.
Took less than 1 minute to install. Snap in and DONE. The easiest job ever. Thank You!
Parts Used:
Door Shelf Retainer Bar
  • Raymond from Pawtucket, RI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Replace the handle mount
When I was moving the refrig. handles from one side to the other...I broke one of the mounts. It was SO easy to order from this place, and they ship IMMEDIATELY. Second time I have used them, and am VERY impressed.
Parts Used:
Handle Mounting Block
  • RUTH from AUSTIN, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Brooken Drawer Rail Support
The repair was very easy. I took out the top glass shelf which the drawer is attached to and unscrewed the broken support. Then just lined up the new support and screwed it in place. Placed the top shelf back in the fridge and slid the drawer into place along the new rail supports. Very smooth process.
Parts Used:
Drawer Support Rail - Right Side Drawer Support Rail - Left Side
  • Mary Lou from Scranton, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Broken meat traysupport rail
Remove 1 screw, pull out old part, insert new part, replace screw. Takes longer to clean off the fridge shelf than to replace the part.
Parts Used:
Drawer Support Rail - Left Side
  • Rusty from Newbury, MA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the 2536480240D
316 - 330 of 435
Back to Top