Models > 2536419240D > Instructions

2536419240D Kenmore Freezer - Instructions

All installation instructions for 2536419240D parts

These instructions have been submitted by other PartSelect customers and can help guide you through the freezer repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the 2536419240D
196-210 of 286
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

BROKEN door gasket

  • Customer: Ronald from West Springfield MA
  • Difficulty: A Bit Difficult
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers, Socket set
  • 0 of 0 people found this instruction helpful
i read on line that it is easier to install the door gasket if you remove the door which also involves taking the freezer door off. start at the top and work your way down. easier with two people but one person can do it.not difficult, just press the gasket into the groove and the closing of the door will adjust it as is is needed.knowing this sequence will save you time.

Freezer was cold bit the refrigerator was warm.

  • Customer: Christopher from Wilmington DE
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
Based on the diagnosis on this site I thought the 66% odds of the problem being the Defrost Timer looked pretty good, $30 including shipping versus a Sears tech phone estimate of $250-300. BINGO! Just follow the online installation instructions and don't forget to use the reset switch as described. Works like new! THANK YOU

The bottom shelf on the refrigerator door broke

  • Customer: Wendy from Caledonia NY
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
My part arrived 2 days after I ordered it!!! Great service!!! The old one popped right off and the new one popped right on. Easy fix no tools required!!!!!

Refrigerator section warm

  • Customer: Laurie from Meridian ID
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
My husband watched the video on your website and found it very easy to do the repair. The repair company that diagnosed the problem wanted $210 to do it. The part I ordered was under $20, and after he installed it the refrigerator has been working great. We would highly recommend your site to anyone who needs to fix anything!

fridge not blowing cold

  • Customer: wayne from marietta GA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
bottom left cornerof fridge defrost timer replaced two bolts and a wire

broken

  • Customer: Mark from Laconia NH
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
just replaced it

The gasket was torn and missing some chunks in some areas.

  • Customer: Jessica from Canton MI
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
I did not believe the other posts about how easy this was because that is not at all how any project goes for me. I was wrong. The original gasket slid out of the lip around the door and the new one went back on in less than 5 minutes. It has made a HUGE difference in the performance of the fridge. It did take 2 or 3 days for the gasket to fully conform to the fridge itself, but there was still a good seal during that time.

2 door shelf retainers missing when bought refrig used.

  • Customer: Georgia from Bonners Ferry ID
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Snapped retainers into place with no tools. Took less than a minute.

Broken right rail to dràwer.

  • Customer: Gregory from Circle Pines MN
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
The part came right away, It only took me a couple of minute's to fix. I just flipped the shelf around. Slid one end of the rail in a slot, and put one screw in on the other end. Finished.

retainer shelf bar broke

  • Customer: Anita from Wilmington IL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
It was sooo easy to replace new part. Just popped out broken shelf bar and snapped in new one. I am so glad i found PartSelect Thank-you

ice buil up on freezer,not defrosting

  • Customer: Ed from Glendale CA
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
first I replaced the timer control hoping thats the problem,unfortunately situation the same ice build up on the freezer.so I replaced the defrost thermostat.right now I'll still observing the condition if still the same.may be in couple days.so far its good.and to replace the parts is not difficult and easy.

retainer had broken in half

  • Customer: THOMAS from LAKELAND FL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
took old half off - 2 seconds - put new part in - 10 seconds - DONE!Took longer to get it out of the box than it did to install. Really SIMPLE! Thanks Parts Select!

support rail broke when overstuffed meat drawer forced closed

  • Customer: Kenneth from Corpus Christi TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Disassembled shelf and drawer to find broken rail. Found parts number on website's "exploded" parts view. Reassembled with new part and drove one screw to secure. FORTUNATELY I kept old broken part which had special screw needed to reassemble. I would have expected replacement part to include its attachment screw, but it did not.

Drawer support broke

  • Customer: Lowry from Lafayette NJ
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
After removing the drawer from refrigerator I fixed it on the kitchen counter in less than 15 minutes.

Freezer running hot.

  • Customer: Eddie from Zolfo Springs FL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Replaced the ptc starter switch. Fied the problem and she's running fine.
All Instructions for the 2536419240D
196-210 of 286