25353612300 Kenmore Refrigerator - Instructions

Ordered the replacement bin> It arrived the next day. Tool 3 seconds to pt it in place and all is back to normal. Good service.

The replacement was simple, only two screws and the electrical plug. The problem was the location of the two screws that were impossible to see directly and difficult to access with a screw driver.

I watched the step-by-step installation video and followed the instructions therein.

I ordered a freezer upper door bin and received the wrong part. I contacted PartsSelect immediately and they re-shipped the correct part. It was well packaged, I removed the part and paper towel wiped it down and snapped it into the freezer door bin. I highly recommend PartsSelect for their great products and Customer Service. I even add them to my contact numbers in my cell phone, they will be the first I call, when needing a part for any appliance!

watched video online at part select the repair was very easy unscrew a couple screws disconnect water lines reconnect water lines to new housing and re-screw everything back.

I replaced the condenser fan motor, but first I bought a brush to clean the coils. I first unplugged the fridge and took off the back panel. I located the fan motor and noticed how dusty it was back there. All the dust dirt and pet hair can accumulate making the motor work harder and overheat. I cleaned the coils with the coil brush and a shop vac. Once I cleaned it, I started to take off the three screws that held the fan motor suspended,its important that you move the fridge enough so you have adequate room to work. I unplugged the motor and finished removing the screws. When I removed the motor I was upset when I compared it to the motor I was sent because it looked physically different. The motor I removed had a plug that was integrated in the motor, but the one I received had a plug that pigtailed outside the motor. I called PartSelect and told them they sent me the wrong motor. The lady that I spoke with was very friendly and helpful, and after looking up my part # she assured me that it was the right part. Next I had to remove the fan from my old motor, the nut that held the fan on looked like a clip, but it screwed off using open pliers.I removed the fan and put it on the other motor, using the parts supplied. Before I installed the motor I screwed the three screws in and out of the three screws holes to make the screws go in easier during instalation. I installed the fan motor using the three screws supplied, and once it was secure I spun the fan with my finger, making sure the fan spun freely and installed the plug to the fan. I then plugged in the fridge to make sure the fan was working,and replaced the back panel. Hope this helps you out, good luck.

I was unsure how I was going to be able to make this repair. However, it was so easy I have planned to order other items to make the repairs myself. I am a rental manager at a condominium complex and I think my homeowners will be very happy when they see how much money we can save them by our office doing the repairs.

replaced

Replaced all broken pieces quickly for very cheap! Website very easy to use!!!

Followed video instruction provided on this site.

1st my 72 year old husband has not had great success in repairing anything: electrical or plumbing. We got the part the next day. Had ordered it late one afternoon and had it the next morning in Wyoming. From the time we took it out of the box, disconnected the old one, plugged in the new one, remounted, it took less than 15 minutes. Amazing and it works great. Didn't need extra electrical connector, but tricky part on electrical connectors is to squeeze side to take apart and put back together. He used mirror to see the screws to loosen to take out and put back in ice maker. Next day our tray was full of ice. Good service/Good Product.

Replaced door bin and was a perfect fit. Replaced drawer support rails in about 5 minutes. Videos supplied are a great tool to make installation so easy.

Easily found the parts we needed from the diagrams, Hinge bearing and door closing cam, watched the video, which was very helpful, ordered the parts from the parts list numbers...Our order came in just a few days and my husband put the parts on in about 20mins. Couldn't have done it without the help we found on your page...Thank you so much....Will be back if we have any other trouble.... Bill and Ellen Lopitz.....

Out of the box and slipped right in on the door. Part was here in 3 days. Excellent service.

It really was a replacement rather than a repair, but I think it worth my while to relay how easy it was to find and order the new bin from Part Select. I was pleased with everything from finding the correct part easily to the shipping and payment. Thank you for such a vauable source to tap from any time I need a part. I am very happy to recommend this service to anyone who may need it.