25353612300 Kenmore Refrigerator - Instructions

Just set the new shelf over the clips on the door. VERY easy.

followed the video and had little or no trouble loosening or tightening bolts or phillips head screws. The only difficulty was removing the spacer on the door itself. Otherwise a piece of cake. Good video and easy to follow instructions.

Replaced

The repair was very easy, just a matter of snapping the bin on the door. However, i was very please and impressed with the expeditious service that i received. I ordered the door around noon and it was delivered by 10am the next day. This is what i consider "quality service" and I thank this company sincerely.

just snapped part unto door.

Ordered and received new shelf. Replacement took about one minute.

Had them in a couple of days. Very impressive. I've recommended this site to many friends.

Watched the Parts Select video associated with this part. Very easy repair. Removed the right-hand door, removed the broken hinge, popped in the new part, applied some lubrication and put the door back on. Lengthiest part was removing food items from the door in preparation for the job. Highly recommend watching the video first as it shows you exactly what to do and how easy this job is.

Removed the door,pried out broken pieces.Replaced with new bearing{bushing}Lubricated bearing with light grease and replaced door.Took about 15 minutes by myself.

I can fix just about anything, but when I'm approaching to fix an item that I have previously no experience with I always do some research before attempting a repair. Once I diagnosed the problem (The evaporator fan was not kicking on), I purchased both the thermostat and fan because either one of them could be the source as to why the refrigerator was not working. Unless you want to drink room temperature milk for three to four more days, I highly recommend that you replace both. After cleaning out the freezer and removing the pull out bucket, I removed the screws and pulled out the metal enclosure. The fan was easy to take out along with the thermostat. The time consuming part of the repair was splicing the old wiring harness with the new thermostat and condenser fan since the replacement condenser fan had a different wiring harness. I had to heat sink the butt splice connectors and I wrapped all the wires in a cold weather electric tape. After that I plugged the refrigerator right in and to my delight it worked :) I love this website because it is very user friendly accompanied with fast and efficient shipping. Thanks again!

Installed new valve.There are several pieces of tubing coming off of the valve. Pay close attention to where they go. Color coordination is poor on the new valve.

Very easy repair. Remove 2 screws, unplug wire harness. My model used the included harness adapter. I needed to secure the extra harness length with the included cable ties. Icemaker went back in smoothly with no problems. Making ice like crazy now.

I watched your video on how to do the procedure and followed it, step-by-step. It worked like a charm. When I took the crisper drawer and runner out of the refrigerator, I noticed that the lower drawer support had broken as well. So, I have ordered 4 to have a few on hand and will repeat the process when my new order arrives. I'm very pleased! Thank you very much.

Couldn't be easier! Unscrewed the filter cover manually, removed the old filter, put in the new one and screwed the cover back on. Then slotted the door shelf bin in place. AND I found the ordering simplicity itself, plus the items were delivered the next day. Great service!

It took less than 5 minutes to remove old filter and install new one.