Models > 25353612300 > Instructions

25353612300 Kenmore Refrigerator - Instructions

All Instructions for the 25353612300
721 - 735 of 1012
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Door "popped" when opened
Took every thing out of the door, removed 2 screws (plus cover screw), laid the door down, replaced the parts, put the door back on. When the refrigerated stuff was back in the door shelves, I was done.
Parts Used:
Door Closing Cam Hinge Bearing
  • Larry G from Ames, IA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Broken door closing cam
As per video. No problem.
Parts Used:
Door Closing Cam Hinge Bearing
  • Juan from Santa Fe, NM
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!
The bottom door bin broke
Just popped it in..didn't fit really well...had to force it some what which I didn't like but same drawer. Good to go.
Parts Used:
Refrigerator Door Bin
  • Linda from Saint Albans, WV
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Bottom bin on door broke
Replaced bin in door. Noi tools needed
Parts Used:
Refrigerator Door Bin
  • Larry from Livingston, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Not getting cold in lower Refrigerator
Watch the video provided by PartSelect and did exactly the same percedure. Shows what screws to remove and how to remove and replace the part. The freezer compartment was iced up quite a bit so defrosted it before installing part.
Parts Used:
Evaporator Fan Motor Kit - 120V 60Hz
  • Charles from Wallingford, CT
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Door would not close.
First off, I ordered the wrong part. Following the "return" protocol, , Partselect, UPS had the correct part delivered to me the next day. The instructional videos linked to the part description made my repair effortless. A great resource for DIY's.
Parts Used:
Hinge Bearing
  • John from Granbury, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
The upper Crisper Drawer Cover cracked apart making it difficult to keep crisper closed and weight of items on shelf applied too much pressure on cover. The cantilever design of shelf once frame of cover was cracked was placing too much load in the wrong places making the shelf virtually unusable.
The repair literally to 5 minutes. Remove one shelf, slide new one in. Simple repair.
Parts Used:
Upper Crisper Drawer Cover - Glass NOT Included
  • Erica from Dunkirk, MD
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Two broken door shelves
Wiped down the new shelves; popped them in place; done in about 1 minute each. Delivery was as expected; watched progress of packages on the Fed Ex site. Delivered as promised.
Parts Used:
Refrigerator Door Bin
  • Bonnie from Corrales, NM
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
brocken
replaced with screws driver and removed the old one put the support.thank for fast service.
Parts Used:
Crisper Cover Support - Front Meat Drawer Rail - Right Side
  • Julio from naples, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
missing door shelf
The part was delivered the next day, but I had ordered the wrong part. I sent it back and they made it really easy to return it.
Parts Used:
Door Bin
  • Sharon from Hesperia, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Door bin broke
Just ordered a new door bin replacement and installed it.
Parts Used:
Refrigerator Door Bin
  • Nancy from Apex, NC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
water dispenser/ice maker inop
Removed old water pump and cut off ends of all lines. Plugged them into each water inlet/outlet and turned it on. Instant water to dispenser but took about 6 hours for ice maker to get water. Had to prime the ice maker. Works great and saved a lot of money ordering parts from you. Thanks.
Parts Used:
Refrigerator Water Inlet Valve
  • Michael from White Springs, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
meat shelf was broke
got the new one replased it and it was easy plus im certified in majjor apliences
Parts Used:
Door Shelf Refrigerator Door Bin
  • michael from kennewick, WA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
support broke
just put it in the old hole. the hard part was getting the old one out. you have to poke the center piece in to remove. otherwise you will break your fridge. then you have to to pull the center piece out before you put new in.
Parts Used:
Crisper Cover Support - Front
  • Lisa from Mena, AR
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
refrigerator staying to warm
husband did it took only a few min part was easy to find
Parts Used:
Defrost Thermostat Kit
  • nicole from chipley, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the 25353612300
721 - 735 of 1012
Back to Top