Quick Question!

Have you ever purchased from PartSelect.com before?

Models > 24HA241 Frigidaire

24HA241 Frigidaire Air Conditioner - Overview

Get Parts and Repair Help for 24HA241

If you know the air conditioner repair part you need, you can browse the list of all parts on the 24HA241, or you can search by name or part description. You can also find your part by where it is located on the 24HA241 by selecting a section below. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

KNOB-CONTROL

Fan Blade,with clamp

$5.71

SCREW

$81.38

Blower Wheel

If your air conditioner is making an unusual noise, the problem could be with the blower wheel, or its fans. The motorized fan in an air conditioner pulls air through the filter and over the cold evaporator coils and then re-circulates the cooled air back into the room. There is also a second fan on the motor shaft that cools the condenser coils at the back. An unusual noise is usually due to the fans striking the inside of the air conditioner. Check your blower wheel, and the fan blades for physical damage, dust, and signs that they have been hitting something during the cooling process. If the wheel is damaged and the unit is not working properly because of it, replace the part right away. Remember, the power should be disconnected from the air conditioner before you perform this repair.

$374.20

MOTOR-FAN

Temperature Control

$8.43

CLAMP

$69.54

FILTER

$3.70

SCREW

$4.79

SCREW

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

My A/C unit quit working on the hottest day of the year! I had this A/C unit for 13 years and I just knew I'd never find a fan blade for the same make and model, so I tried to go purchase a new one but couldn't find one big enough since it was so late in the season.

  • Customer: Tracy from Morgantown, WV
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 11 of 14 people found this instruction helpful
After receiving the fan blade, I popped off the old one and put on the new one! The A/C unit worked like new once again!! It even blew colder air than before! The hardest part about the entire process was getting the13 year old fan blade off! I'd recommend your website to anyone looking for a part!
Thank you for all your help!! read more

Fan blade broke - it wouldn't cool

  • Customer: Bobalee from Loganville, GA
  • Difficulty: Difficult
  • Time to Complete: More than 2 hours
  • Tools Required: Pliers, Screw drivers, Socket set, Wrench set
  • 5 of 7 people found this instruction helpful
2001 Window AC/Heat Unit.
I ran across your web site and ordered the fan $70.00, telling myself that if we could fix it we saved $650.00. A new - window air conditioner is over $700.00 for heat and air.
Believe it or not the two of us oldies put it up on the desk on CARDBOARD so we wouldn't scratch the desk (my husband wouldn't have thought ... read more

Fan blades were Broken and making loud noise

  • Customer: Eric Peterson from Blakeslee, PA
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 4 of 5 people found this instruction helpful
Pulled airconditioner out of Housing. Removed screws holding plastic cover in place. Loosened lock ring. Removed old fan blades and replaced with new fan blades. Reassembled plastic cover and returned air conditioner to housing. The unit is now quieter than before! read more