Quick Question!

Have you ever purchased from PartSelect.com before?

Models > 24FK-6CKXWV8-DY

24FK-6CKXWV8-DY Magic Chef Microwave Oven Combo - Overview

Get Parts and Repair Help for 24FK-6CKXWV8-DY

If you know the microwave oven combo repair part you need, you can browse the list of all parts on the 24FK-6CKXWV8-DY, or you can search by name or part description. You can also find your part by where it is located on the 24FK-6CKXWV8-DY by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your microwave oven combo. We’ve also included any installation videos we have for 24FK-6CKXWV8-DY parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$3.88

Light Bulb - 40W

This an authentic OEM 40-Watt replacement light bulb, used in a number of household appliances. It is specially designed to withstand extreme temperatures, which is why these repla...

$3.50

Light Bulb - 40W

The 40W lightbulb is found in the interior of your microwave, which will need to be replaced if you have noticed the light is no longer coming on after opening the door. The light bulb is clear in color and made of glass. For this installation, you will need a Phillips screw driver and utility knife. Before beginning, make sure to disconnect the power and wait a few minutes. Remove the two screws in the grove vent and set aside and then lift the grill vent forward and pull up to remove. The light bulb should be underneath a panel and may require the use of your utility knife to remove the silicone holding it in place. Line the new bulb up with the socket and screw into place until it is snug.

$31.80

Flat Style Oven Igniter Kit

The flat style oven igniter kit is used in gas ovens and ranges. It is what provides the heat needed to open the gas valve, and it ignites fuel for the burner assembly. This part c...

$7.49

Oven Door Spring

The oven door springs create tension which allows the door to open and close with ease. This spring can be used on either the left or right side of your oven, is made completely of metal, and is approximately 6 inches long. If your oven door will not open or close easily, you may need to replace this part. It may be a good idea to replace both hinges at the same time, because if a spring has become loose, the other hinge is likely to have the same issue. You may need to remove the side panel of the oven to reach where the spring attaches, so make sure the oven is off and is cool to the touch. This part is sold individually.

$3.00

Frame Screw

Sold Individually.

$40.09

Inner Door Glass

This inner door glass is a little over sixteen inches long, and it is nine and a half inches wide.

$34.81

Burner Spark Ignition Switch

$34.45

Burner Cap Kit

Sold individually.

$12.97

Clock Knob

This clock knob is just under an inch long. It is black in color and is made of plastic. There is a chrome disc of decoration on its top.

$57.37

Oven Door Gasket

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Oven would not work but the Broiler did

  • Customer: James from Ferndale, MI
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers, Socket set
  • 283 of 311 people found this instruction helpful
The oven had been working intermittently for a while and after repeated threats of starvation from my spouse I finally took a look even though it was summer and the grill was working fine. The Igniter would glow red when the oven was turned on but the gas would not flow to it no matter what the temperature setting. I searched online and found this site that ... read more

Oven would'nt light

  • Customer: Charles from Charlestown, RI
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers, Screw drivers
  • 107 of 117 people found this instruction helpful
In most cases if your oven won't light or takes a long time to light you may have a bad igniter even if it glows. To check the igniter use a voltmeter to check for 120 A/C volts going to the igniter and3.5 A/C volts going between the ingniter and the gas valve. My bad ingniter glowed but had only only 3.0 A/C volts going to the gas valve for the oven. The ne... read more

oven failed to light

  • Customer: Beryl from Dawsonville, GA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 56 of 59 people found this instruction helpful
My son replaced the broiler igniter this spring, so I had a clue as to what was required. This was even easier and since I had back surgery recently & my husband was out of town that was a giant plus!

I unplugged the oven, removed the oven door, found the release latch and removed the oven floor. I then removed the 2 screws that held the ignit... read more