24588L0 General Electric Range - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Broken roller in hinge
Slipped off the front door. Removed 3 screws & spring. Replaced with new part. Hooked the spring & secured with the three screws.
Parts Used:
-
David from Richmond, VA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
element burnt out
-
jeanne from augusta, ME
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Oven door hinge wheels were worn out and grinding.
Followed the online video. Unhooked the springs, removed the 3-screws on each side. Installed the new hinges in reverse order. Used the wear marks on the old springs to ID and place the new springs in the holes on the new hinges. Great company to deal with....never a surprise, Great communications letting you know that your parts were on order and then again that they were shipped with shipping info and numbers to call with any questions. The best part has been that the parts drop right in everytime I have ordered from them!!!! Thanks Dan!
Parts Used:
-
Dan from Beloit, WI
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Bake element burnt out
I watched your video and then did it the way your repair man did it. You guys are great! Thank You!
Parts Used:
-
christopher from benton, AR
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver
Was this instruction helpful to you?
Thank you for voting!
oven baking heating element failed
used a nut driver and needle nosed pliers to remove the old element and install the replacement.
Parts Used:
-
gregory from south haven, MI
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers
Was this instruction helpful to you?
Thank you for voting!
Bottom element out
Easy once discovered that had to bend element in back do would not short out on back cover.
Parts Used:
-
Mona from Monroe, WA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!
oven heating element sparks
I looked at this sight and it looked like replacing the oven lower heat element would be easy. I received the part the day after I ordered it. I unplugged the oven, removed two screws from the back panel, took the old element out and put the new one in. Oven works great, it was easy.
Parts Used:
-
Justin from Yorkville, IL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver
Was this instruction helpful to you?
Thank you for voting!
Bake element burned out
If you can repair from back of stove so much easier than inside. Local store wanted 43.00 purchased from part select 29.00. Great prices and delivery time, had next day.
Parts Used:
-
kathleen from theodore, AL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Socket set
Was this instruction helpful to you?
Thank you for voting!
burnt out element
-
Dennis A. from New Canton, IL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver, Pliers
Was this instruction helpful to you?
Thank you for voting!
Element burnt into.
Removed the old element and replaced it with the new element, It was simple and quick. We received the part in one day, and the cost was half that if bought from sears.
Parts Used:
-
John from west terre haute, IN
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Nylon Roller On Both Hinges Wore Out
Watched the video and did exactly as it instructed. Very easy to do, took 10 minutes in all.
Parts Used:
-
Dan from Evansville, IN
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
burnt in two
-
Herb from Wadsworth, OH
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver
Was this instruction helpful to you?
Thank you for voting!
Bake Element broke apart
bought new element and followd instructions in video. Two screws were really tough to break loose so I had to use the vice grips to grasp the screws and break them loose. Once that happened it was smooth sailing. Ladies can do this just by following the video as long as the screws will come loose. Also buy new screws to replace the old ones. In short, it was a snap!!!!
Parts Used:
-
Thomas W from Myrtle Beach, SC
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:15 - 30 mins
-
Tools:Wrench (Adjustable)
Was this instruction helpful to you?
Thank you for voting!
Bake element burned out
I removed the burned out element, took the part number off of it and placed an order with you for the part. I received the Bake Element in 3 days and it took me 5 minutes to install it! The same Bake Element was 3 times the price at Home Depot!!!!! I cant thank you enough :)
Parts Used:
-
Randal from Yuma, AZ
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Socket set
Was this instruction helpful to you?
Thank you for voting!
My Oven Light Lens Cover Was Broken
I could not get a lens cover due to the fact ge does not make any more since the appliance is an older model. Thanks to part select they had the part which I badly needed. It was easy to installed. Thanks again part select.
Parts Used:
-
Hopeland from Jamaica, NY
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!