Models > 22TA 4KZ

22TA-4KZ Magic Chef Range - Overview

Get Parts and Repair Help for 22TA-4KZ

If you know the range repair part you need, you can browse the list of all parts on the 22TA-4KZ, or you can search by name or part description. You can also find your part by where it is located on the 22TA-4KZ by selecting a section below. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the 22TA-4KZ [Viewing 3 of 3]

$3.81

Rubber Grommet

Used as the bottom feet of a gas stovetop grate. Sold individually.

$4.21

Flashtube Extension

$42.47

Oven Rack

Sold individually.

$48.06

Burner Control Valve with Igniter

$2.70

Hex Nut

Part may differ in appearance, but functions same as original.

$2.70

Glass Clip - Black

This clip helps to hold the exterior glass in place. Order quantity required.

$99.00

Regulator Kit with Fitting

This part will cut off the flow of gas to your appliance once it reaches a certain pressure.

$2.70

Frame Screw

Sold Individually.

$18.76

Top Burner Igniter

Used with RV Ranges.

$55.34

Exterior Door Glass

This is just the exterior glass to the oven door. This is NOT the complete door assembly.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

The grommets came apart metal from rubber.

  • Customer: Frank from Pierce ID
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 11 of 14 people found this instruction helpful
I replaced the broken grommets with the new ones. I purchased 8 so I would have back ups because I did not feel the new one would last either. I think they cost TOO MUCH but I could not haggle for price. read more

range top loose, grommets missing

  • Customer: joseph from wildomar CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 8 of 11 people found this instruction helpful
very easy to push each grommet into range top holes read more

Factory installed hinges were bent, preventing the oven door to close tightly

  • Customer: Tom from Issaquah WA
  • Difficulty: A Bit Difficult
  • Time to Complete: 1- 2 hours
  • Tools Required: Screw drivers, Wrench(Adjustable)
  • 6 of 10 people found this instruction helpful
Had to turn off the propane, disconnect the propane line and then remove several screws holding the stove in the cabinet. Once I was able to pull the unit out of the cabinet, I had to remove several other screws for the sides in order to gain access to the hinge arm and spring. The front of the oven door had to be removed in order to get to the hinges. Re... read more