22RW-3BKZ Magic Chef Range - Instructions

I replaced the broken grommets with the new ones. I purchased 8 so I would have back ups because I did not feel the new one would last either. I think they cost TOO MUCH but I could not haggle for price.

With a family of five a needed an extra oven rack as my RV oven is very small. After much aggravation between calling and going online to the manufacturer I still could not get any help. Even with locating the all important parts number. I was just about to give up when I was surfing around and found this website. Wow! What a relief! Not only did you show my where to find the part number, but I ordered it and got it within days. I spent more time on hold and online with the manufacturers customer service than anything else. From now on, no matter what I need, whether RV or home, I'm going staright to PartSelect. Thank You and my family thanks you too, as we wil be camping on Turkey Day and now I'll be able to get all the meal done at once! Happy Thanksgiving! God Bless

very easy to push each grommet into range top holes

saw burner tube was completely rusted at end and would not line up with burner. decided to go ahead and replace all three tubes. was easy to install, able to get a good cleaning job on unit in the process. works fine, wife is happy and that is what matters in a motorhome.

pull knob off streight out. remove two phillips head screws, disconnect wire to disassemble. To reassemble reattatch wire to replacement igniter, screw in two phillips head screws and push on the knob.

Opened oven door, slid in rack , closed door...
Fit perfect....

The fuel lines had to be cross over from the factory positions which made one 3/8" to short. Resolved problem by cutting the sheet metal on the back of the stove top from 1" hole to 1. 5" By cutting a slot in the lower protion of the hole which when bent down allowed me to rebend the fuel line down giving me the needed length to reconnect the fuel line. New thermoset/fuel valve work great upon completion. Sincerely john o. Bevers

Pushed into hole by hand, really simple

Pull knob off igniter shaft, remove two screws, take out igniter, unplug wire. Reverse to install. Would have been very simple except the metal insert that is supposed to be inside the new knob was missing from the kit. I tried using the old insert in the new knob but it did not fit tight enough and would spin on the shaft. Had to use the old worn knob on the new igniter. Customer service said they don't carry the inserts. What? The brand new knob is useless! Needed to get the stove fixed so I didn't bother returning the entire kit. Oh well, stove works now!

called and ordered the part. it arrived the next day. amazing. put it in and all was well./ another happy yacht owner.
Tim Wiest
Tim Wiest yacht Service

After some research in finding the information under the range hood, I did internet searches to find the appropriate replacement rack.
It fits great and we are thrilled to have the additional rack.

Odered rack on internet. Received in timely manner. Was the correct oven part. Very satisfied. Thank you.

This item had to be returned. Didn"t fit. Our shaft is shorter, and the new knob would not stay on.

Remove 2 screws and 1 wire reinstall same with new switch and knob

Pulled knob,removed 2 screws removed wire,removed old ignitor repl. With new reversed procedure,done