Models > 22403

22403 Jenn-Air Range - Overview

Get Parts and Repair Help for 22403

If you know the range repair part you need, you can browse the list of all parts on the 22403, or you can search by name or part description. You can also find your part by where it is located on the 22403 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for 22403 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the 22403 [Viewing 1 of 1]

$58.06

USE WPL 703650

$2.70

SCREW

$51.16

Fan Control Switch

$4.46

Infinite Switch Grommet

$62.82

Grill Element

$24.30

Burner Cartridge Terminal Block

No spades or wiring come with this part. To order the spades or wiring, please research by model# of appliance.

$87.14

Single Grill Grate

$4.46

Fan Switch Grommet

This grommet is located under the fan switch.

$13.96

Fan Switch Knob

This knob accepts a D-shaped shaft.

$52.27

Air Inlet Grill

This part is located over top of the blower in the center of the stove top.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Burner had one temperature--hot, regardless of setting

  • Customer: James H from Oxford NY
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 51 of 57 people found this instruction helpful
1. Killed power and removed the regulator's knob, noted the position of the old control.
2. Took off the cover for the center vent and loosened the two screw holding the housing in place--the screws didn't have to come out completely as it is a U-shaped friction hold.
3. Unscrewed the two screws holding the old control switch in place--lifted the h... read more

Burner Control not Functioning

  • Customer: Randall from Mohnton PA
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 19 of 22 people found this instruction helpful
Simple Repair!
Turn off Power
Remove four screws under panel.
Remove old burner knob.
Drop Burner Panel from range
Remove 5 wire connectors from old burner control
with pliers
Remove 2 screws that held burner control to range
panel
Install new burner control
Rplace two screws to burner control
Replac... read more

Knob stem broke off at the base near the switch

  • Customer: Samuel from San Antonio TX
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers, Socket set
  • 13 of 23 people found this instruction helpful
Removed stove top from the counter. Removed the glass frame and glass from the top. Removed the broken switch. Replaced with the new switch. Reassembled the unit and replaced it in the counter top.

One problem is the switch only fits in the space one way because of the first burner light. When installed the only way the knob fits on the switch st... read more