All Installation Instructions for 22116

Old grease filter had hole wore through

Pulled the old one out & inserted the new one. Less than five minutes.

Parts Used:

Grease Filter

Michael from Mountain Iron, MN
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Worn out stove top

We replaced the burner grates, knobs, air filter and burner pan. Looks as good as new!

Parts Used:

Grease Filter

Redona from Roseville, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

vent fan cloging up

old filter fell into from removing and cleaning,
removed cover pulled out filter ,replaced it with new one.

Parts Used:

Grease Filter

JAMES from McALESTER, OK
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

switch body that supports mounting nut broke

removed cover, pulled out old switch, moved each wire from old to new switch, mounted switch, replaced cover.

Parts Used:

Infinite Switch

Jon from GREENFIELD, AL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Old filter couldn't be cleaned

This was a no-brainer: old filter out, new filter in. In addition to replacing an old, greasy filter, I found that the exhaust fan now draws cooking fumes much more efficiently. So why did I wait the 6 years since we moved into this house to do this???

Parts Used:

Grease Filter

William from Goshen, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Grease filter was torn and bent

I just lifted out old filter, and put in new one.

Parts Used:

Grease Filter

Brent from Rancho Santa Fe, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Filter needed replacement. Old one was falling apart.

Removed old filter, dropped in the new one.
(This really was not a "repair")

Parts Used:

Grease Filter

Sophie from Warrenton, VA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Burner won't get hot

It was very simple. detached front switch panel by removing 4 screws inside top of oven door. Removed knob from old switch and removed nut holding switch to panel. Rotated switch panel to expose guts. replaced wires from old switch to new switch, screwed new switch to panel, replaced old knob. idea came from previous story at this website. Works great.

Parts Used:

Infinite Switch

Robert from Golden, CO
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

age & solivents melted the on pilot light lens

removed the wooden cutter block rt side top and the air exst.vent guard lf side then with a phileps driver 2 screws holding the control knob assm.in. both control knob assm.rt&lf come off the same way. just scraped out what that was left of the old lens stuck in new one and reatached light bulb holder. this bulb holder presses on and slides side ways to lock in place. then snaped control knob assm. back in and tighten the 2 screws. replaced vent guard & wooden cutter block. all was done.

Parts Used:

Pilot Light Lens - Red

JAMES from McALESTER, OK
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Broken hinge

Took the door apart and replaced the hinge, very easy

Parts Used:

Door Hinge

Don from Exchange, WV
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers

0 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

rotten filter for down draft vent

How I did the repair is no consequence. The service of easily finding the part on your site is GREAT! and the shipping time more than reasonable! Thanks!

Parts Used:

Grease Filter

Craig from Ashburn, GA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

0 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Needed to replace the grease filter!

Followed the directions. Piece of cake!!

Parts Used:

Grease Filter

Colette from Annapolis, MD
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

0 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

The paint begin popping of my original grill. My son had a friend that said that he could remove the old paint and repaint for me. Unfortunately in the shuffle of a motorcycle performance shop the grill was lost. I have been trying to get help from Jenn-Aire since March and they just kept saying th

Very simple for me!!! Open the box, uncover the new grill and lay it in its place.

Thank you so much!

Parts Used: