Models
>
216-404-715
216-404-715 (1986) MTD Tiller - Overview
Sections of the 216-404-715
[Viewing 4 of 4]_WW_1.gif "Page A Diagram and Parts List for 1986 MTD Tiller")
_WW_2.gif "Page B Diagram and Parts List for 1986 MTD Tiller")
_WW_3.gif "Page C Diagram and Parts List for 1986 MTD Tiller")
_WW_4.gif "Page D Diagram and Parts List for 1986 MTD Tiller")
Keep searches simple, eg. "belt" or "pump".
Lawn Mower Ground Drive Belt
PartSelect #: PS9172714
Manufacturer #: 954-04032B
3/8 x 36-1/8-inch
This ground drive belt (part number 954-04032B) is for lawn mowers.
Ground drive belt 954-04032B drives the transmission, which propels the lawn mower wheels.
Wear work glov...
$27.39
In Stock
Bearing
PartSelect #: PS9164778
Manufacturer #: 931-0374
The flange sleeve bearing, also known just as the bearing, is sold individually, and assists the tine shaft rotation on your tiller by reducing friction between the moving parts and securing their pos...
$7.48
On Order
Dust Cap
PartSelect #: PS9173723
Manufacturer #: 931-0487
This OEM dust cap prevents dust from entering the shaft and surrounding area of your tiller. This part is black, sold individually, and made out of plastic. Due to damage from ongoing use, this part c...
$11.25
In Stock
Seal
PartSelect #: PS9159282
Manufacturer #: 921-0175
The bearing seal, also known simply as the seal, is a special seal for the bearings in your tiller. It attaches in the tiller housing, with the bearing and shaft, and over time it can become damaged d...
$9.84
On Order
Jamlock Nut, 3/8-16
PartSelect #: PS9299545
Manufacturer #: 712-0266A
The Jamlock Nut is a 3/8-16 inch metal nut which can be installed using a socket or wrench set. It's used to secure and lock parts in place. If the part is damaged and comes loose it should be replace...
$3.99
In Stock
Clutch Control Cable
PartSelect #: PS9170560
Manufacturer #: 946-0535
This clutch control cable is an OEM part made to be used with your garden tiller. Its function is to engage the clutch in order to drive the tiller. This part is black and silver in color, composed of...
$66.64
In Stock
Bearing .62" I.D. x 1.38" O.D. x .437" Thk.
PartSelect #: PS9167498
Manufacturer #: 941-0155
This authentic OEM bearing measures 0.62 inches inside diameter, and 1.38 inches outside diameter, and is 0.436 inches thick. Silver and balck in color and sold individually, the bearing is comprised ...
$24.15
In Stock
Fl-Wash 1.00" X 1.63" O.D. X 03
PartSelect #: PS9166464
Manufacturer #: 936-0163
This Flat Washer helps to spread load under a nut or bolt in a wide variety of lawn and garden equipment. Its dimensions are 1.00 inches x 1.63 inches O.D. x 03. This part is silver and made of metal,...
$3.43
On Order
Bell. Wash. .340 I.D. x .872 O.D.
PartSelect #: PS10006541
Manufacturer #: 736-0242
Sourced directly from the original manufacturer, this Bell Washer is made of gold-colored metal and is sold individually, not as part of a kit or assembly. It is used to provide spacing between variou...
$4.99
In Stock
Questions And Answers for 216-404-715
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Mixer began to make a noise on speed two and higher
We took our 30 plus year mixer apart. I removed the old grease. There was some crumbly looking grease in the main housing gear section where the nylon gear is located. It looked like it had flour mixed in it. Not certain. Removed as best possible all old grease and applied 6 oz. of new Benalene grease to all of the gears. Now it do
... Read more
es not make the slight howl sound.
Read less
Parts Used:
-
LISA M from BATESVILLE, AR
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
5 of 12 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!