Quick Question!

Have you ever purchased from PartSelect.com before?

Models > 21336

21336 Jenn-Air Microwave Oven Combo - Overview

Get Parts and Repair Help for 21336

If you know the microwave oven combo repair part you need, you can browse the list of all parts on the 21336, or you can search by name or part description. You can also find your part by where it is located on the 21336 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your microwave oven combo. We’ve also included any installation videos we have for 21336 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Exact Part matches for your search term

[Viewing 1 of 1]

DISCONTINUED

This part number matches the current model number "21336".

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.91

Light Bulb - 40W

Sold individually.

$22.22

2 Piece Broiler Pan

The top of this part is now black.

$47.41

Light Switch

This light switch is located in the door of the oven.

$4.89

Screw

This screw is sold individually.

Electonic Clock Assembly

This digital electonic clock assembly is seven and a half inches long. If you are installing this clock into a wall oven, the metalllic support nut on the center switch is not need...

Door Latch with Screws

The part may be different in color but will function the same as the orginal.

Retainer Clip

BUSHING

$0.20

SCREW

Rack Support

This microwave support is white in color and less than an inch long. It is made of plastic, and it helps to support the metal rack in your microwave.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

seal was black and stiff from burned in spilled grease and sauce

  • Customer: Rosemary from Pawleys Island, SC
  • Difficulty: A Bit Difficult
  • Time to Complete: More than 2 hours
  • Tools Required: Screw drivers
  • 27 of 42 people found this instruction helpful
Unscrewed and pulled the door off and then took the three layers of the door apart in order to clean off the burned-on goop and remove the old and insert the new seal. The last screw was rusted in and the drill stripped it so that it was impossible to remove. I levered the remaining two layers apart, holding them open with screw drivers, and inserted the... read more

Old seal torn

  • Customer: Robert from Boston, MA
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 13 of 18 people found this instruction helpful
Older model oven with model number worn off. Photo with the 1" grid made it possible for me to find the right size part.

You only need a phillips head screwdriver to install this seal, but it is a bit tricky to line up the new seal and the fiberglass insulation inside the door, so take your time and make sure everything lines up and is tucked in ... read more

my oven door seal was frayed

  • Customer: Richard from Arlington, TX
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 12 of 18 people found this instruction helpful
I dissasembled the entire door..lots of screws and watch you dont drop the glass pieces...also keep them in order so you dont get confused on what goes where. I cleaned everything nicely and installed the new seal and everything went together perfectly and looks and works like new. I recieved my part by mail very quickly and the price was MUCH better than ... read more