Models > 21137

21137 Jenn-Air Oven - Overview

Get Parts and Repair Help for 21137

If you know the oven repair part you need, you can browse the list of all parts on the 21137, or you can search by name or part description. You can also find your part by where it is located on the 21137 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your oven. We’ve also included any installation videos we have for 21137 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$2.52

Light Bulb - 40W

Sold individually.

$55.94

Bake Element - 240V

This spade-style bake element has push-on wire terminals and is found on the bottom of the oven.

$18.07

2 Piece Broiler Pan

$2.77

Screw - sold individually

$17.33

ANCHOR-TIP

$2.70

Screw

This screw is sold individually.

$3.96

Lamp Retainer Gasket

$17.30

Selector Knob with Clip

This knob accepts a D-shaped shaft.

$25.41

Door Seal

This oven door seal is made of rubber and has a metal hook on either end to hold it in place and it sits on top of the glass window pane. Sold individually.

$33.50

Oven Rack

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

bottom heating element in oven disintegrated

  • Customer: DENISE from GERMANTOWN TN
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 18 of 20 people found this instruction helpful
First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires. I threw away the old pieces.

Then I connected the two wires on the new element. I pushed the wires back in the insulation in the wall of the cabinet. Then I inserted the two screws and tightened them in.read more

Inner Oven Glass broken

  • Customer: David from Wayne NJ
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 18 of 23 people found this instruction helpful
I removed two retainer screws which released the outside panel.
Next I removed 2 screws which hold the middle glass pane from one of its retainer brackets.
The was another panel with 4 screws to remove before reaching the final glass inner assembly.
Once that panel was reoved with the broken glass it was time to put the repacement glass assemb... read more

Oven heating element blew out

  • Customer: Shirley from Dallas TX
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 9 of 10 people found this instruction helpful
Removed 2 screws, pulled element out. My husband used an ohmmeter to see if the electricity needed to be turned off. It showed no voltage. He could not remove electrical connectors by hand, so he used insulated pliers. When he touched the connectors, a shower of sparks covered the inside of the oven and tripped the breaker switch. Then we noticed the pl... read more