Models > 2045B0A

2045B0A Roper Range - Overview

Get Parts and Repair Help for 2045B0A

If you know the range repair part you need, you can browse the list of all parts on the 2045B0A, or you can search by name or part description. You can also find your part by where it is located on the 2045B0A by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for 2045B0A parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$2.70

Blower Wheel Clamp

$20.69

Surface Burner Knob

Sold Individually.

$41.79

Broil Element - 208V

This broil element is found on the roof of the oven and has push-on terminals.

$2.70

Hex Nut

10-32 hex - Sold Individually - Appliance originally takes 3 of this item.

$29.90

SWTCH-LITE

DISCONTINUED

DISCONTINUED

screw 10-32x5/8``

DISCONTINUED

TYPE 4,BUTANE

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

My stove top is 30 years old. I was down to one knob. I looked up the part by brand and age. the pictures were accurate and the size dimensions were perfect.

  • Customer: Mark from Albuquerque NM
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 7 of 7 people found this instruction helpful
Pulled off the one remaining knob, installed the new ones. One minute and the stove works perfectly. read more

Burnt out broiler element

  • Customer: Starla from Vashon WA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 5 of 5 people found this instruction helpful
Turned off power to range because I was scared. Unscrewed broiler element, pulled part forward and pulled off wires that were attached to the back, attached wires to new element, pushed it back in place, screwed it back on to oven. Cooked my bruchette! read more

BROIL ELEMENT WAS BURNED OUT

  • Customer: DAVID from COTTAGE GROVE WI
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver
  • 6 of 11 people found this instruction helpful
1. MOVE OVEN OUT FROM WALL
2. REMOVE BACK PANEL OF OVEN, 8 SCREWS
3. REMOVE 3 SCREWS INSIDE OVEN HOLDING ELEMENT
4. PULLED WIRE CONNECTIONS OFF OF ELEMENT
5. REVERSE PROCEDURE TO INSTALL NEW ELEMENT read more