Models > 1VET27DKXGW0

1VET27DKXGW0 Whirlpool Refrigerator - Overview

Get Parts and Repair Help for 1VET27DKXGW0

If you know the refrigerator repair part you need, you can browse the list of all parts on the 1VET27DKXGW0, or you can search by name or part description. You can also find your part by where it is located on the 1VET27DKXGW0 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for 1VET27DKXGW0 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.82

Light Bulb - 40W

Sold individually.

$7.28

Light Rocker Switch

$3.86

Touch-Up Paint - White

$39.45

Water Inlet Valve - 120V 60Hz

$4.11

SCREW

$48.50

Ice Bucket

Holds the ice when it's released by the icemaker.

$3.96

Drawer Roller Wheel

This drawer roller wheel is all white in color and is made entirely of plastic. This wheel is used with the drawers of some refrigerators.

$9.75

Spray Paint - 12 oz. - White

$4.46

Foot Brake - Black

Sold Individually.

$2.70

Kick Plate Retaining Clip

This kick plate retaining clip is sold individually and is made entirely of metal. If you are needing the kick plate as well, remember to check with your model number as these clips may already be included.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Lights inside refrigerator not working

  • Customer: Clint from Rayville MO
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 31 of 38 people found this instruction helpful
I used a flat-head screwdriver to pop out the old light rocker switch. Then, I unplugged the wires, plugged them into the new light rocker switch, and then popped the new switch into the hole. That's it! Lights began working again. read more

Compressor "grounded" and quit running

  • Customer: Mike from Baytown TX
  • Difficulty: Easy
  • Time to Complete: 1- 2 hours
  • Tools Required: Nutdriver, Pliers, Wrench(Adjustable)
  • 33 of 70 people found this instruction helpful
Replaced the compressor with the new one I purchased from you. Installed new parts and recharged unit. The refrigerator / freezer is working better than new. Thanks for the great deal on the compressor. It was here in 3 days. All the parts fit exactly and had no difficulty in the installation or startup. The directions for the wiring were a great help ... read more

Ice maker quit making ice cubes

  • Customer: Bruce from Belleville MI
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers, Wrench(Adjustable)
  • 13 of 15 people found this instruction helpful
Turned off water supply, removed old Water Valve, installed new Water Valve, turned water supply back on. After first couple cycles of icemaker, increased water pressure by opening water supply valve one more full turn. Good cubes! Job completed in about 1 hour - moving fridge out, swapping Water Valve, moving fridge back in. (time to clean coils not include read more