1CWTW5590ST0 Whirlpool Washer - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
No Agitation
Have replaced the rubber "dogs" in the agitator before. Washer had an extended service contract that expired in 1986. It just won't die.
Parts Used:
-
George from Calera, AL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Socket set
Was this instruction helpful to you?
Thank you for voting!
The Agitator Directional Cogs were worn.
Replaced them as I saw it done in the video. It made it a piece of cake!
Parts Used:
-
Kenneth from Plymouth, MN
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Socket set
Was this instruction helpful to you?
Thank you for voting!
lid switch has burned out (actually melted) and the washer would no longer agitate
removed the two screws from the back of the dial bar on the top of the washer. removed original unit, and install the new unit.
Parts Used:
-
keith from vernon, CT
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Auger not spinning
Agitator Repair Kit (PS334650) has EVERYTHING you need for the repair . No extra parts needed. I paid a guy to come out the first one and they charged $70! So, this time, I bought the $21.92 kit, economy shipping, and it arrived the very next day. Wahoo! Took a couple of minutes and had a load running in 10 minutes. What a savings, what a great resource. Thanks PartSelect.com You're bookmarked forever.
Parts Used:
-
Dan from Fresno, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Socket set
Was this instruction helpful to you?
Thank you for voting!
Cracked drain hose
disconnect the electrical and tilt the machine far enough to reach under and remove hose clamp.Remove old hose and replace with new one.
Parts Used:
-
Daniel from Kansas City, MO
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers
Was this instruction helpful to you?
Thank you for voting!
Agitator spun free both directions
I was expecting to spend $100 or more if not having to go buy a new washer. I found your site and I was like "wow" then I found the Video of the intsual. It could not be any more simple. Entire job took 5 min. And under $4 for parts. All I can say is outstanding and thank you
Parts Used:
-
Joe from Belchertown, MA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers, Socket set
Was this instruction helpful to you?
Thank you for voting!
top agitator not functioning (stripped out)
removed all parts listed above replaced with all new parts very easy repair any one could do it
Parts Used:
-
Timothy from Tarentum, PA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Socket set
Was this instruction helpful to you?
Thank you for voting!
Agitator no longer agitates
DIAGNOSIS 1) Popped off the agitator cap. 2) Used a 1/2" socket extension driver to back out the plastic retention nut 3) removed the agitator and poured all the little plastic pieces into my hand 4) googled up the agitator assembly by model number, led me to Part select website 5) identified the plastic pieces as "dog ears" 6) ordered new dog ears for just under $4 REPAIR 1) waited 3 days and got dog ears in the mail 2) had a beer and opened the mail 3) inserted the dog ears into agitator assembly according to the picture on Part Select web site 4) had another beer 5) installed the agitator back into the washer, tightened the retention nut 5) admired my handiwork with another beer 6) washed a load of clothes DIAGNOSIS TIME - about 15 minutes REPAIR TIME - about 4 minutes plus 10 more to drink the beers
Parts Used:
-
Darrell from Frisco, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Socket set
Was this instruction helpful to you?
Thank you for voting!
Slow leak in defective part of hose.
New hose arrived in 2 days in excellent condition. Repair was fairly easy and fit perfectly. Did notice, however, that new hose was upgraded with a thicker part and a clamp that fit much better. Old hose cracked from repeated shaking where clamp was not tight enough and the hose at this clamp was too thin compared to the new hose. We felt it seemed obvious that the manufacturer must have had many complaints about this original hose. But thank you for your fast delivery and excellent new part.
Parts Used:
-
Paul from Dresden, NY
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Wrench (Adjustable)
Was this instruction helpful to you?
Thank you for voting!
the cam teeth were wore out
I gave the parts to my wife. Then I took them back and fixed the washer .
Parts Used:
-
Anthony from Rhoadesville, VA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers
Was this instruction helpful to you?
Thank you for voting!
Agitator was not turning.
The repair went very quick and easy. What made this repair so quick and easy is because of the very prompt and quick shipping of the replacement part from this company. This was my first experience with this company and will always use in the future. I ordered the part one day and the very next day I received the part. Great job to this company!!!!!
Parts Used:
-
Tabitha from Mitchell, GA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Socket set, Wrench (Adjustable)
Was this instruction helpful to you?
Thank you for voting!
Top agitator had quit moving
FIRST!! I watched partselect's video on repair. It was right on! I removed the dispenser, removed the seal, used a 7/16 socket on an extension to remove the bolt and lifted the agitator out. Removed the old dogs and housing and replaced it with the new ones. Reversed the take down order and done in about 15-20 min. Easiest fix I've ever encountered!
Parts Used:
-
John from Coxs Creek, KY
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Socket set
Was this instruction helpful to you?
Thank you for voting!
Washer did not agitate or spin. Found broken coupling on motor. Top part of agitator did not rotate. Found broken cams.
As per the video that was sent. The washer was repaired very easily and with no problems and minimum time spent. Thank you for your fantastic service and information to accomplish the repairs and look forward to doing business with you again in the future. Steve and Lory
Parts Used:
-
Stephen from Centerville, MA
-
Difficulty Level:Really Easy
-
Total Repair Time:1- 2 hours
-
Tools:Nutdriver, Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!
top part of agitator would not turn
used socket wrench with an 8in extension to remove agitayor bolt that was under cap on top part of agitator. was back together in about 15 min.correct parts were shipped in record time.
Parts Used:
-
WILBERT from ARNOLD, MO
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Socket set
Was this instruction helpful to you?
Thank you for voting!
Agitator would not agitate
I searched the web and found your YouTube Repair Video... I said to myself "I can do that". I ordered the kit and it arrived in 2 days !!! I was amazed. From the video I estimated my repair time to be around 20 - 30 minutes. I was done in less than 10 minutes. I Love You! I Mean it!THANKS! Mike*
Parts Used:
-
Michael from Bridgeport, WV
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Socket set
Was this instruction helpful to you?
Thank you for voting!