Models > 19C400

19C400 Briggs and Stratton Engine - Overview

Sections of the 19C400

[Viewing 10 of 10]
Page A Diagram and Parts List for Briggs and Stratton Engine
Page A
Page B Diagram and Parts List for Briggs and Stratton Engine
Page B
Page C Diagram and Parts List for Briggs and Stratton Engine
Page C
Page D Diagram and Parts List for Briggs and Stratton Engine
Page D
Page E Diagram and Parts List for Briggs and Stratton Engine
Page E
Page F Diagram and Parts List for Briggs and Stratton Engine
Page F
Page G Diagram and Parts List for Briggs and Stratton Engine
Page G
Page H Diagram and Parts List for Briggs and Stratton Engine
Page H
Page I Diagram and Parts List for Briggs and Stratton Engine
Page I
Page J Diagram and Parts List for Briggs and Stratton Engine
Page J
Keep searches simple, eg. "belt" or "pump".
Connector-Hose – Part Number: 692317
Connector-Hose
★★★★★
★★★★★
(1)
PartSelect #: PS9074730
Manufacturer #: 692317
$7.06
  In Stock
Seal,Oil – Part Number: 391086S
Seal,Oil
★★★★★
★★★★★
(1)
PartSelect #: PS9277860
Manufacturer #: 391086S
The Oil Seal is a manufacturer-approved rubber part which provides a seal between the crankcase and crankshaft by attaching around the axle shaft on the crankhouse housing. Installation is rated as "M...
$6.59
  In Stock
Spring-Rewind Str – Part Number: 490179
Spring-Rewind Str
PartSelect #: PS8978476
Manufacturer #: 490179
This rewind starter spring or as it is also known, recoil spring, rewinds the pull robe back into the starter housing of your engine. The spring is made of metal, silver colored, and sold individually...
$15.43
  In Stock
Pulley-Starter – Part Number: 295871
Pulley-Starter
PartSelect #: PS8942071
Manufacturer #: 295871
$15.80
  In Stock
Key-Flywheel – Part Number: 222698S
Key-Flywheel
★★★★★
★★★★★
(1)
PartSelect #: PS8925657
Manufacturer #: 222698S
$4.99
  In Stock
Gasket-Float Bowl – Part Number: 281165S
Gasket-Float Bowl
★★★★★
★★★★★
(1)
PartSelect #: PS8945656
Manufacturer #: 281165S
$5.60
  In Stock
Clutch-Starter – Part Number: 399671
Clutch-Starter
★★★★★
★★★★★
(2)
PartSelect #: PS8968281
Manufacturer #: 399671
$37.32
  In Stock
Line-Fuel – Part Number: 791745
Line-Fuel
PartSelect #: PS9140673
Manufacturer #: 791745
This fuel line is compatible with several different makes and models of small engine equipment and is sold as an individual part. Equipped with the securing clamp, this rubber fuel line is used to tra...
$10.16
  In Stock
Armature-Magneto – Part Number: 591459
Armature-Magneto
★★★★★
★★★★★
(1)
PartSelect #: PS9045176
Manufacturer #: 591459
$58.83
  In Stock
Filter-A/C Cartridge – Part Number: 691643
Filter-A/C Cartridge
PartSelect #: PS9074225
Manufacturer #: 691643
$18.69
  In Stock
Bowl-Float – Part Number: 495933
Bowl-Float
★★★★★
★★★★★
(1)
PartSelect #: PS8983295
Manufacturer #: 495933
$11.10
  On Order
Filter-Pre Cleaner – Part Number: 492889
Filter-Pre Cleaner
PartSelect #: PS8982674
Manufacturer #: 492889
$6.65
  On Order
View More
Back to Top

Questions And Answers for 19C400

Be the first to ask our experts a question about this model!

Back to Top
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Gas tank leaking, pull starter rivets worn, rope and rope bushing worn
The gas tank was a simple job, close the fuel shut off, remove fuel hose then back out 2 bolts on the mounting bracket. Reverse procedure to mount.
To replace the pull starter/recoil assy. Remove low oil warning light, and air filter housing then remove the 4 bolts holding the front cover. Once the front cover is free remove kill switch wire
Drill out the rivets holding the recoil housing w/ 3/16 bit. Screws w/ nuts are included to use in place of rivets, I used red Locktite on the screws which hold the started recoil to the front cover. Make sure the pull rope is correctly oriented in the 11:00 position. Replace front cover, four bolts. Air filter housing, kill switch wire and low oil warning light
Read less
Parts Used:
Tank-Fuel (Black Plastic) Starter-Rewind
  • Dennis from EUFAULA, OK
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers, Socket set, Wrench set
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More
Back to Top