Models > 1885W1A

1885W1A Roper Range - Overview

Get Parts and Repair Help for 1885W1A

If you know the range repair part you need, you can browse the list of all parts on the 1885W1A, or you can search by name or part description. You can also find your part by where it is located on the 1885W1A by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$7.02

Surface Burner Plug-In Block Kit

This newer-style terminal block kit includes two metal brackets, two pre-crimped wires with terminals, two ceramic wire nuts, a heat shrinking tube, and a mounting screw.

Order within the next 9 hrs and your part ships today!
$2.70

Hex Nut

10-32 hex - Sold Individually - Appliance originally takes 3 of this item.

Order within the next 9 hrs and your part ships today!
$48.00

Broil Element

This five loop broil element has a hanger style mount.

Order within the next 9 hrs and your part ships today!
$20.20

Drip Pan

This is for use on gas burners. * This part may differ in appearance from the original, but functions the same as original part.

Order within the next 9 hrs and your part ships today!

STIRRER COVER ***

CONTRL-PWR

DISCONTINUED

DISCONTINUED

Igniter (Broil. & Oven Burner)

SPIDER AND SHAFT ASY.

Common Symptoms of the 1885W1A [Viewing 1 of 1]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

One burner didn't work all the time the other would go red hot

  • Customer: Phillip from Pekin IL
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 9 of 9 people found this instruction helpful
I unplugged the stove from the outlet, then removed the two burners I was going to be working on and the drip pans. Then I raised the top part of the stove and removed the screws holding the plug-in blocks to the stove. Then I cut the two wires going to the old plug-in block and stripped the wires back to match the new wire parts. Then I placed the sleeves o... read more

Electric burner on stove would not work

  • Customer: Ronald from Fresno CA
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 5 of 5 people found this instruction helpful
The first thing I did was to turn the power off to the stove by turning the Stove circuit breaker off at the Main breaker panel. I next removed the 4 burners by pulling them out of their plug-in blocks. I then removed the four screws that held the top of the stove to the body so I could access the bad plug-in block, the screws were located under each of th... read more

Electric stove burners working intermitantly.

  • Customer: Michael from St. Louis MO
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 4 of 4 people found this instruction helpful
replaced old, worn blocks with new style surface plug in block kits - all 4 burners. Completely resolved the problem at very low cost (less than $50.00). read more