Models > 15GN-1-GG

15GN-1-GG Magic Chef Cooktop - Overview

Get Parts and Repair Help for 15GN-1-GG

If you know the cooktop repair part you need, you can browse the list of all parts on the 15GN-1-GG, or you can search by name or part description. You can also find your part by where it is located on the 15GN-1-GG by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your cooktop. We’ve also included any installation videos we have for 15GN-1-GG parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$7.02

Surface Burner Plug-In Block Kit

This newer-style terminal block kit includes two metal brackets, two pre-crimped wires with terminals, two ceramic wire nuts, a heat shrinking tube, and a mounting screw.

Order within the next 1 hr and 43 mins and your part ships today!
$18.07

2 Piece Broiler Pan

The top of this part is now black.

Order within the next 1 hr and 43 mins and your part ships today!
$2.70

Screw

This screw is sold individually.

Order within the next 1 hr and 43 mins and your part ships today!
$2.88

Frame Screw

Sold Individually.

Order within the next 1 hr and 43 mins and your part ships today!
$33.53

Door Side Seal

Sold individually. Order quantity required.

Order within the next 1 hr and 43 mins and your part ships today!
$4.70

SCREW

Sold individually.

Order within the next 1 hr and 43 mins and your part ships today!

HANDLE SH

SWITCH- HI

KNOB, SELECTOR SWITC

$5.29

SPACER- DO

Order within the next 1 hr and 43 mins and your part ships today!

Common Symptoms of the 15GN-1-GG [Viewing 1 of 1]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

One burner didn't work all the time the other would go red hot

  • Customer: Phillip from Pekin IL
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 9 of 9 people found this instruction helpful
I unplugged the stove from the outlet, then removed the two burners I was going to be working on and the drip pans. Then I raised the top part of the stove and removed the screws holding the plug-in blocks to the stove. Then I cut the two wires going to the old plug-in block and stripped the wires back to match the new wire parts. Then I placed the sleeves o... read more

Electric burner on stove would not work

  • Customer: Ronald from Fresno CA
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 5 of 5 people found this instruction helpful
The first thing I did was to turn the power off to the stove by turning the Stove circuit breaker off at the Main breaker panel. I next removed the 4 burners by pulling them out of their plug-in blocks. I then removed the four screws that held the top of the stove to the body so I could access the bad plug-in block, the screws were located under each of th... read more

Electric stove burners working intermitantly.

  • Customer: Michael from St. Louis MO
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 4 of 4 people found this instruction helpful
replaced old, worn blocks with new style surface plug in block kits - all 4 burners. Completely resolved the problem at very low cost (less than $50.00). read more