Models > 1453

1453 - Overview

Models starting with 1453

Click on the best match to narrow your results.

Exact Part matches for your search term

[Viewing 1 of 1]
Washer – Part Number: 1453
Washer
This part number matches the current model number 1453
PartSelect #: PS8864102
Manufacturer #: 1453
  No Longer Available
Keep searches simple, eg. "belt" or "pump".
Screw, 8/18 x 3/8 – Part Number: WP90767
Screw, 8/18 x 3/8
★★★★★
★★★★★
(2)
PartSelect #: PS11746840
Manufacturer #: WP90767
This screw is sold individually.
$5.43
  In Stock
Order within the next 4 hrs and your part ships today!
Lid Switch – Part Number: W10820036
Lid Switch
★★★★★
★★★★★
(16)
PartSelect #: PS11723153
Manufacturer #: W10820036
This 3 prong lid switch is used for washing machines that do not have a tub light.
$23.74
  In Stock
Order within the next 4 hrs and your part ships today!
Delta Frame Surface Unit - 6 Inch – Part Number: WPY04100165
Delta Frame Surface Unit - 6 Inch
PartSelect #: PS11757480
Manufacturer #: WPY04100165
This is a delta frame surface unit, also known as coil element, for a stove, range, or oven. It is a 6-inch surface burner with a reinforced delta frame that carries 1250 watts and 240 volts. The burn...
$50.96
  In Stock
Order within the next 4 hrs and your part ships today!
Ceramic Fuse - 20 amp – Part Number: WPM0805101
Ceramic Fuse - 20 amp
★★★★★
★★★★★
(3)
PartSelect #: PS11747931
Manufacturer #: WPM0805101
This microwave fuse is just over an inch in length. It has a white ceramic center, and metal on either end. This is a twenty amp 250-volt fuse, and is used to power your microwave. If your microwave w...
$10.21
  In Stock
Order within the next 4 hrs and your part ships today!
Heat Resistant Adhesive – Part Number: W10841140
Heat Resistant Adhesive
★★★★★
★★★★★
(1)
PartSelect #: PS11728058
Manufacturer #: W10841140
This is a heat-resistant adhesive for your appliance. The heat resistance allows you to stick parts such as grate feet, gaskets, and felt seals in hot areas, such as a cooktop, without compromising th...
$23.88
  In Stock
Order within the next 4 hrs and your part ships today!
Hex Nut – Part Number: WP488130
Hex Nut
★★★★★
★★★★★
(2)
PartSelect #: PS11742711
Manufacturer #: WP488130
This hex nut is an authentic Whirlpool part that is sourced directly from the original equipment manufacturer, and will fit a variety of appliances including ovens, microwaves, refrigerators, air cond...
$9.58
  In Stock
Order within the next 4 hrs and your part ships today!
Hex Nut – Part Number: WP112432
Hex Nut
PartSelect #: PS11738304
Manufacturer #: WP112432
This 10-32-inch hex nut works with multiple appliances in your home as a fastener. This specific model is sold individually. Hex nuts usually have 6 even sides and together they are used with bolts an...
$8.06
  In Stock
Order within the next 4 hrs and your part ships today!
Capacitor – Part Number: WP59001168
Capacitor
★★★★★
★★★★★
(1)
PartSelect #: PS11743000
Manufacturer #: WP59001168
The high-voltage capacitor is an electronic device that holds a charge of electricity in the high-voltage circuit of the microwave. The capacitor stores electricity similar to how a battery does, but ...
$122.87
  In Stock
Order within the next 4 hrs and your part ships today!
Door Handle Spring – Part Number: 310197
Door Handle Spring
PartSelect #: PS336086
Manufacturer #: 310197
  No Longer Available
SCREW – Part Number: W11227370
SCREW
PartSelect #: PS12349585
Manufacturer #: W11227370
$14.12
  In Stock
Order within the next 4 hrs and your part ships today!
Drip Pan – Part Number: 4333737
Drip Pan
PartSelect #: PS359972
Manufacturer #: 4333737
This is for use on gas burners. * This part may differ in appearance from the original, but functions the same as original part.
  No Longer Available
Mounting Nut – Part Number: WP422617
Mounting Nut
PartSelect #: PS11742352
Manufacturer #: WP422617
Sold individually.
  No Longer Available
View More
Back to Top

Common Symptoms of models starting with 1453

[Viewing 8 of 8]
Element will not heat
Fixed by
these parts
Fixing
Show All
Will Not Start
Fixed by
these parts
Fixing
Show All
Leaking
Fixed by
these parts
Fixing
Show All
Won’t turn on
Fixed by
these parts
Fixing
Show All
Will not drain
Fixed by
these parts
Fixing
Show All
Will not agitate
Fixed by
these parts
Fixing
Show All
Won’t Start
Fixed by
these parts
Fixing
Show All
No heat
Fixed by
these parts
Fixing
Show All
Back to Top
Replacing the Lid Switch

Replacing the Lid Switch

View More
Back to Top
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Lid closes, switch wouldn't turn on machine.
Used toothpick for a year to push switch acctuator far enough to engage switch. Broke my foot and found time to order part thru PartSelect. Went from cast to boot and received part 2 days after ordered. Had difficulty with foot and getting to switch. Went back into PartSelect and figured out how to dis-assemmble panels thru the diagrams. Time on my job doesn't, just that their service and expertise that is available to everyone is there to use. Broken bones or not, I will always get my parts and advice from PartSelect. Thanks to PartSelect.
Read less
Parts Used:
Lid Switch
  • Kenneth from Wilmington, IL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Screw drivers, Socket set
31 of 47 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer would fill up, wash, then stop
I deduced the lid switch was the problem.

I removed the two screws holding the control panel on. Pulled the control panel back.
Disconnected the ground wire of the lid switch.
removed the two top clamps that hold the panel to the top of the machine.
Pulled back the casing (outside of the washer) and placed it on it's side on the floor. Here I could reach the switch. Removed old, installed new and reversed the process.

The part that gave me the biggest problem was setting the casing back on to the frame. You have to slide the front part in at the bottome, then lean back the rest of it.
Read less
Parts Used:
Lid Switch
  • Glen from Plano, TX
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
22 of 30 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
microwave oven blew fuse
First I removed upper front grill by removing two Philips head screws on top and pulling off. This exposed the Philips head screw which holds control panel in place. After removing screw I pushed up on panel and it came off to expose fuse. With needle nose pliers I removed old fuse and again with pliers held new fuse in position. With the help of a bladed screwdriver, I pushed new fuse into holder, then replaced panel, screw and grill. This took less than 15 minutes even as one of the wires on control panel pulled out of connection and took some time to locate where to reconnect, otherwise was an easy fix
.
Read less
Parts Used:
Ceramic Fuse - 20 amp
  • tad from tamarack, MN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers, Screw drivers
24 of 37 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More
Back to Top