Models > 1425^0A

1425^0A Whirlpool Range - Overview

Get Parts and Repair Help for 1425^0A

If you know the range repair part you need, you can browse the list of all parts on the 1425^0A, or you can search by name or part description. You can also find your part by where it is located on the 1425^0A by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for 1425^0A parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$42.22

Surface Burner Element Switch - 8"

This control switch controls the stove top 8" surface burner.

$23.22

Dryer Door and Washer Lid Switch Kit

This kit is simple on/off mechanism that prohibits the machine from operating when the door is open.

$47.05

Broil Element

This five loop broil element has a hanger style mount.

$38.81

BELT

STIRRER COVER ***

DISCONTINUED

DISCONTINUED

14151A Models

DISCONTINUED

DISCONTINUED

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

the element did not turn compleatly off, the on light stayed on.

  • Customer: chaz from fairplay CO
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 21 of 24 people found this instruction helpful
removed the screws holding the back metal panel, this exposed the wires to the switch. tested the wires to find that they were live when the switch was in the off position. ordered a new switch. UNPLUGED THE STOVE. removed the knob on the front of the stove. this exposed 2 screws, removed screws and the switch came away from the stove. removed each wire fro... read more

Lid closes, switch wouldn't turn on machine.

  • Customer: Kenneth from Wilmington IL
  • Difficulty: Easy
  • Time to Complete: 1- 2 hours
  • Tools Required: Nutdriver, Screw drivers, Socket set
  • 13 of 15 people found this instruction helpful
Used toothpick for a year to push switch acctuator far enough to engage switch. Broke my foot and found time to order part thru PartSelect. Went from cast to boot and received part 2 days after ordered. Had difficulty with foot and getting to switch. Went back into PartSelect and figured out how to dis-assemmble panels thru the diagrams. Time on my job doesn... read more

1 OF 4 ELECTRIC BURNER WOULD NOT HEAT.

  • Customer: Hollie from Virginia Beach VA
  • Difficulty: Difficult
  • Time to Complete: More than 2 hours
  • Tools Required: Pliers, Screw drivers, Socket set, Wrench set
  • 12 of 16 people found this instruction helpful
TO FIX OUR WHIRLPOOL ELECTRIC RANGE BURNER, I FOLLOWED THE FOLLOWING STEPS:

1. READ THE OWNER'S MANUAL AND PARTS LIST.

2. DISASSEMBLE AND INSPECT TO DETERMINE CAUSE - BAD BURNER OR BAD SWITCH.

3. ORDER REPLACEMENT SWITCH ON LINE FROM PARTSELECT, AND WAIT FOR DELIVERY.

4. REPLACE AND TEST. SWITCH APPEARED TO BE ME... read more