Models > 14 3083 23 01

14-3083-23-01 Tappan Cooktop - Overview

Get Parts and Repair Help for 14-3083-23-01

If you know the cooktop repair part you need, you can browse the list of all parts on the 14-3083-23-01, or you can search by name or part description. You can also find your part by where it is located on the 14-3083-23-01 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your cooktop. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the 14-3083-23-01 [Viewing 2 of 2]

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$0.43

Top Burner Mounting Screw with Washer

This is now a new zinc and black-coated screw that will resist rust and seizing.

$13.81

Surface Burner Igniter Electrode

Use this igniter with sealed burners.

$25.15

Small Burner Base with Orifice and Igniter

This part also includes 3 screws. Small burner cap is sold separately.

$37.39

Spark Module

This part sends enough current to the igniter to create a spark to the bottom of the burner cap.

$31.02

Igniter Switch

When the gas burner valve knob is depressed and turned, this part creates a spark that lights the gas and starts the burner.

$26.59

ORIFICE

$137.62

Gas Pressure Regulator

***No Conversion Kit Required - Adjust On Appliance*** This valve automatically cuts off the flow of a liquid or gas when it reaches a certain pressure.

$5.79

Burner Cap - Black

Surface Burner Knob - Black

Sold Individually. This knob accepts a D-shaped shaft.

$31.05

SUPPORT

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Igniter porcelain was cracked and burner would not light.

  • Customer: Rusty from Howell NJ
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 27 of 37 people found this instruction helpful
un-pluged stove,removed the one screw holding the broken igniter. disconected the one wire. installed new igniter and slipped on wire. The igniter came with a new bracket, the old one rusted away which is why the old igniter broke. read more

all 4 knobs broke - they are very cheaply made

  • Customer: Kathleen from Maryland Heights MO
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 5 of 6 people found this instruction helpful
put the knob on the stove. if you want to buy a knob for $30+ just know that that is only for ONE knob, not a set. And it doesn't specify that when you are ordering. read more

burner would not lite

  • Customer: Terry from Wilkinson IN
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 5 of 6 people found this instruction helpful
no need to remover burner. Lift top up use a 1x4x5" to hold top up. Use short #2 screw driver remove screw and replace with new igniter read more