Models > 1347^0A

1347^0A Whirlpool Range - Overview

Get Parts and Repair Help for 1347^0A

If you know the range repair part you need, you can browse the list of all parts on the 1347^0A, or you can search by name or part description. You can also find your part by where it is located on the 1347^0A by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$7.02

Surface Burner Plug-In Block Kit

This newer-style terminal block kit includes two metal brackets, two pre-crimped wires with terminals, two ceramic wire nuts, a heat shrinking tube, and a mounting screw.

Order within the next 10 hrs and your part ships today!
$2.70

Hex Nut

10-32 hex - Sold Individually - Appliance originally takes 3 of this item.

Order within the next 10 hrs and your part ships today!
$48.00

Broil Element

This five loop broil element has a hanger style mount.

Order within the next 10 hrs and your part ships today!
$20.20

Drip Pan

This is for use on gas burners. * This part may differ in appearance from the original, but functions the same as original part.

Order within the next 10 hrs and your part ships today!

STIRRER COVER ***

CONTRL-PWR

DISCONTINUED

Igniter (Broil. & Oven Burner)

SPIDER AND SHAFT ASY.

Front Frame

Common Symptoms of the 1347^0A [Viewing 1 of 1]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

One burner didn't work all the time the other would go red hot

  • Customer: Phillip from Pekin IL
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 9 of 9 people found this instruction helpful
I unplugged the stove from the outlet, then removed the two burners I was going to be working on and the drip pans. Then I raised the top part of the stove and removed the screws holding the plug-in blocks to the stove. Then I cut the two wires going to the old plug-in block and stripped the wires back to match the new wire parts. Then I placed the sleeves o... read more

Electric burner on stove would not work

  • Customer: Ronald from Fresno CA
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 5 of 5 people found this instruction helpful
The first thing I did was to turn the power off to the stove by turning the Stove circuit breaker off at the Main breaker panel. I next removed the 4 burners by pulling them out of their plug-in blocks. I then removed the four screws that held the top of the stove to the body so I could access the bad plug-in block, the screws were located under each of th... read more

Electric stove burners working intermitantly.

  • Customer: Michael from St. Louis MO
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 4 of 4 people found this instruction helpful
replaced old, worn blocks with new style surface plug in block kits - all 4 burners. Completely resolved the problem at very low cost (less than $50.00). read more