Models > 12S6

12S6 Briggs and Stratton Engine - Overview

Models starting with 12S6

Keep searches simple, eg. "belt" or "pump".
Primer-Carburetor (7/8"Dia. Fits BS Quantum Engines 5, 5.5 &6 HP – Part Number: 694395
Primer-Carburetor (7/8"Dia. Fits BS Quantum Engines 5, 5.5 &6 HP
★★★★★
★★★★★
(2)
PartSelect #: PS9067198
Manufacturer #: 694395
$4.99
  In Stock
Starter Pawl-Ratchet – Part Number: 281505S
Starter Pawl-Ratchet
PartSelect #: PS8942598
Manufacturer #: 281505S
The manufacturer-approved Ratchet Pawl (Starter Pawl) comes in a set of two (2). This part attaches inside the recoil assembly, and is used to engage the flywheel. if broken due to wear/damage it will...
$3.99
  In Stock
Kit-Needle/Seat – Part Number: 398188
Kit-Needle/Seat
★★★★★
★★★★★
(1)
PartSelect #: PS8963322
Manufacturer #: 398188
This needle and seat kit, also known as a float valve, is found in many types of liquid-fueled lawn equipment, such as carburetors. The valve regulates the flow of fuel into the float bowl. The needle...
$6.91
  In Stock
Gasket-Crankcase – Part Number: 692232
Gasket-Crankcase
★★★★★
★★★★★
(1)
PartSelect #: PS9066140
Manufacturer #: 692232
This part is the replacement gasket for the crankcase on your engine. The gasket helps to create a seal on the crankcase and prevent leaks. If you notice that your engine is not running at peak perfor...
$6.39
  In Stock
Filter – Part Number: 298090S
Filter
PartSelect #: PS9275043
Manufacturer #: 298090S
This is a round, inline fuel filter with 0.25-inch nipples, used in a variety of lawn and garden equipment. It is sourced from the original equipment manufacturer and has the capability to filter out ...
$4.99
  In Stock
Pulley/Spring Assembly – Part Number: 498144
Pulley/Spring Assembly
★★★★★
★★★★★
(2)
PartSelect #: PS8988822
Manufacturer #: 498144
$20.78
  In Stock
Gasket-Float Bowl – Part Number: 693981
Gasket-Float Bowl
PartSelect #: PS9064482
Manufacturer #: 693981
$4.99
  In Stock
Bowl-Float – Part Number: 796611
Bowl-Float
★★★★★
★★★★★
(1)
PartSelect #: PS9306908
Manufacturer #: 796611
$7.06
  In Stock
Starter-Rewind – Part Number: 497680
Starter-Rewind
★★★★★
★★★★★
(2)
PartSelect #: PS8981884
Manufacturer #: 497680
This recoil starter is for lawn and garden equipment engines. Recoil starter spins the crankshaft to start the engine when you pull the rope.
$54.25
  In Stock
Key-Flywheel – Part Number: 222698S
Key-Flywheel
★★★★★
★★★★★
(1)
PartSelect #: PS8925657
Manufacturer #: 222698S
$4.99
  In Stock
Plate-Pawl Friction – Part Number: 692299
Plate-Pawl Friction
★★★★★
★★★★★
(1)
PartSelect #: PS9074726
Manufacturer #: 692299
$5.60
  In Stock
Filter-A/C Cartridge – Part Number: 697029
Filter-A/C Cartridge
PartSelect #: PS9066438
Manufacturer #: 697029
$14.76
  In Stock

Common Symptoms of models starting with 12S6

[Viewing 1 of 1]
Will Not Start
Fixed by
these parts
Fixing Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
starter rewind cord broke
I found the model number of the Briggs & Stratton engine on the inside of the engine housing. Ordered a new starter-rewind unit, as the old cord broke and the thing was well worn. The instructions were clear enough, but to get the old starter off I had to drill out four rivets, which just spin around when you try. I used a hacksaw, chisel, pliers, whatever worked on each rivet; this took a while. When they were finally removed, the new starter pull unit was relatively easy to install with the small nuts and bolts provided. On the Yard Machines log splitter, putting back the engine housing is quite tricky; you have to jostle the thing into place, get the pull handle above the cover and line up the bolt holes.
Parts Used:
Starter-Rewind
  • Seikai from MARICOPA, CA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
8 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
slow delivery
I paid extra to get the item . Received a delivery date, a couple days before date ,received notification it was going and in California and delivery would be another week. Immediately I ordered the carburator from another supplier and received it three days before parts select came in. It was installed and used AND with NO SHIPPING CHARGES>
I returned parts select item for refund. WILL NEVER EVER ORDER FROM THEM AGAIN and I paid extra for shipping which I will not get back. Poor service and they still blame delivery on pandemic, NO ONE ELSE seems to have that PROBLEM,.Vincent K
Parts Used:
Carburetor
  • Vincent from ELDORA, IA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!